You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

In this section:

In OpenStack environment, Metadata and Userdata is populated automatically by the Heat template when SBC SWe cloud instances are launched through templates. If required, Metadata can be updated using nova APIs. The Metadata and the Userdata are provided in the JSON format .

Metadata Format

# Mgt0 interface
   
"IF0" : { 
        "Port":"Mgt0",
		"DHCP": "<Dhcp_flag>",
        "GWV4":"<IP_Address>",
        "IPV4":"<IP_Address/Subnet_Prefix>",
        "GWV6" :"<IP_Address>",
        "IPV6":"<IP_Address/Subnet_Prefix>",
        "FIPV4":"<IP_Address>",
},
   
# Ha0 interface
 "IF1" : {
        "Port" : "Ha0",
		"DHCP": "<Dhcp_flag>",
        "GWV4":"<IP_Address>",
        "IPV4":"<IP_Address/Subnet_Prefix>",
        "FIPV4":"<IP_Address>",
  },
  
# IP interface Pkt0.111
"IF2":  {
        "Port" :"Pkt0",
		"DHCP": "<Dhcp_flag>",
        "GWV4":"<IP_Address>",
        "IPV4":"<IP_Address/Subnet_Prefix>",
        "GWV6" :"<IP_Address>",
        "IPV6":"<IP_Address/Subnet_Prefix>",
        "FIPV4":"<IP_Address>",
        "RNat":"true",
        "VlanId":"111"
  },
},
  
# Secondary IP for Pkt0.111   
"AltIP2" : {
        "IFName":"IF2",
        "IP": "<IP_Address>",
        "FIPV4":"<IP_Address>"
 }
  
# Another Secondary IP for Pkt0.111 
"AltIP3" : {
        "IFName":"IF2",
        "IP": "<IP_Address>",
        "FIPV4":"<IP_Address>"
 }
 
# IP interface Pkt0.222
"IF3":  {
        "Port":"Pkt0",
		"DHCP": "<Dhcp_flag>",
        "GWV4":"<IP_Address>",
        "IPV4":"<IP_Address/Subnet_Prefix>",
        "GWV6" :"<IP_Address>",
        "IPV6":"<IP_Address/Subnet_Prefix>",
        "FIPV4":"<IP_Address>",
        "RNat":"true",
        "VlanId":"222" 
  },
   
# Secondary IP for Pkt0.222
"AltIP4" : {
        "IFName":"IF3",
        "IP": "<IP_Address>",
        "FIPV4":"<IP_Address>", 
 },
   
# IP interface Pkt1.333
"IF4":  {
        "Port":"Pkt1",
		"DHCP": "<Dhcp_flag>",
        "GWV4":"<IP_Address>",
        "IPV4":"<IP_Address/Subnet_Prefix>",
        "GWV6" :"<IP_Address>",
        "IPV6":"<IP_Address/Subnet_Prefix>",
        "FIPV4":"<IP_Address>",
        "RNat":"true",
        "VlanId":"333"
  },
   
# Secondary IP for Pkt1.333
"AltIP5" : {
        "IFName":"IF4",
        "IP": "<IP_Address>",
        "FIPV4":"<IP_Address>"
},

ClusterIp: "<RG_IP>"

If a port needs to be part of multiple VLANs, the IF definition must be repeated for corresponding VLAN IDs as:

"IF3": {
"GWV4": "<IP_Address>",
"DHCP": "<Dhcp_flag>",
"Port": "Pkt1",
"VlanId": "<VLAN_ID_1>",
"IPV4": "<IP_Address/Subnet_Prefix>"
},

"IF4": {
"GWV4": "<IP_Address>",
"DHCP": "<Dhcp_flag>",
"Port": "Pkt1",
"VlanId": "<VLAN_ID_2>",
"IPV4": "<IP_Address/Subnet_Prefix>"
},

"IF5": {
"GWV4": "<IP_Address>",
"DHCP": "<Dhcp_flag>",
"Port": "Pkt1",
"VlanId": "<VLAN_ID_3>",
"IPV4": "<IP_Address/Subnet_Prefix>"
}


Example of Metadata

#Interface definition for Mgt0 port.
"IF0" : {
        "Port":"Mgt0",
		"DHCP": "False",
        "GWV4":"10.0.0.1",
        "IPV4":"10.0.0.24/24",
        "GWV6" :"fd00:10:2b50:4000::1",
        "IPV6":"fd00:10:2b50:4000::1/64",
        "FIPV4":"10.14.52.108",
},
   
# JSON for the Ha0 interface
 "IF1" : {
        "Port" : "Ha0",
		"DHCP": "False",
        "GWV4":"192.168.100.1",
        "IPV4":"192.168.100.24/24",
  },
  
# JSON for the IP interface Pkt0.2007
"IF2":  {
        "Port" :"Pkt0",
		"DHCP": "False",
        "GWV6" :"fd00:10:6b21:2007::1",
        "IPV6":"fd00:10:6b21:2007::1001/64",
        "VlanId":"2007"
  },
# JSON for the IP interface Pkt1.2008

"IF3":  {
        "Port" :"Pkt1",
		"DHCP": "False",
        "GWV6" :"fd00:10:6b21:2008::1",
        "IPV6":"fd00:10:6b21:2008::1001/64",
        "VlanId":"2008"
  },
},
  
# Secondary IP for Pkt0.2007 
"AltIP2" : {
        "IFName":"IF2",
        "IP": "fd00:10:6b21:2007::1002",
}
  
# Another Secondary IP for Pkt0.2007
"AltIP3" : {
        "IFName":"IF2",
        "IP": "fd00:10:6b21:2007::1003",
},

ClusterIp: "192.168.100.25"


  • Ensure the alternate IP definitions have the corresponding IF names.
  • IF dictionary name is any name prefixed by IF .

Example : IF-ABC, IFASD, IF_AS, and so on.

  • The name for alternate IP address on a port can be constructed with port/vlan information.

Example: The second alternate IP address for pkt0's first VLAN IP interface can be named as PKT0_V01_ALT_IP_02.

  • The maximum length of the name is 255 characters.

This section describes about the individual parameters of the metadata passed to the server:

Interface Definition

"IF3":  {
        "Port": "Pkt0",
		"DHCP": "False",
        "GWV4": "10.0.3.1",
        "IPV4": "10.0.3.187/24",
        "GWV6": "fd00:10:6b50:4350::6",
        "IPV6": "fd00:10:6b50:4350::69/64",
        "FIPV4": "54.32.21.12",
        "RNat": "true",
        "VlanId":"222"
  }

The elements which constitutes an interface definition:

Interface Definition Parameters

 

ParametersDescription
IFX

Interface definition name

This element is the name of the dictionary which contains the information of the port. Here, "IF" is a key word, and it can be appended with any name/identifier. Example: IF_Pkt0, IFMgt0, IF-MediaPort. 

Note: The name provided for Interface definition is used in Alternate IP definition. A link is formed between the two definitions based on the Interface definition name.

DHCPThis flag is used to enable or disable the DHCP. If the DHCP is set to False, you need to provide fixed IP for each ports.
Port

Port Name

One of – Mgt0, Ha0, Pkt0, Pkt1. This indicates the actual port to which the definition belongs to.

IPV4

Primary IP on the Private Port  + Prefix - v4

Should be provided only in case of DHCP disabled on the port requires V4 address.

Example: 10.54.116.53/23

GWV4

Gateway IP v4

Should be provided only in case of DHCP disabled on the port requires V4 address.

Note : GWV4 and IPV4 are interdependent, both have to be provided in noDHCP V4 scenario.

IPV6

IP on the Private Port  + Prefix - v6

Should be provided only in case of DHCP disabled on the port requires v6 address.

Example : fd00:10:6b50:4350::69/64

GWV6

Gateway IP v6

Should be provided only in case of DHCP disabled on the port requires v6 address.

Note : GWV6 and IPV6 are interdependent, both have to be provided in noDHCP v6 scenario.

FIPV4

Floating IP associated on the Port.

Provide when the Floating IP is associated (in DHCP enabled and disabled scenario) with the port.

RNat

Reverse NAT flag

Values:

  • True: To consider FIPV4 entity using value provided in the dictionary.
  • False: To configure FIPV4 using SMM rules, and ignore the FIPV4 value provided.

Default value - True

VlanIdID of the port VLAN.

Alternate IP Definition

Alternate IP definition contains the information of an additional IP addresses associated with the port. For each additional IP address added to the port, there has to be corresponding ALT IP definition. The maximum number of ALT IP (alternate IP address) that can be associated with a port is restricted to 14.

"AltIP3" : {

        "IFName":"IF2",
        "IP": "10.2.0.7",
		"FIPV4":"aaa.bbb.ccc.eee"
 }

Alternate IP Definition Parameters

 

ParameterDescription

AltIP3

Alternate IP (ALT IP) definition name/identifier.

Alternate IP address associated with a port. This identifier does not have any restriction on naming.

Example for ALT IP identifier : Alt_Pkt0_AX,  ALT_PKT0_01, signaling_Pkt0_05.

IFName

Interface definition Name

Indicates the association between the ALT IP address and the interface definition.

When the user changes the interface definition name (i.e IFX name), the user must simultaneously change the IFName value in this definition. Otherwise, the link between ALT IP and it's port is lost.

IP

IPV4 or IPV6 address

IP address that needs to be associated with the port.

User can type v4 or v6 address, based on what version the parent interface dictionary contains.

When IF definition has v4/v6 address, the ALT IP definition also must have only v4/v6 address.

In case of dual-stack scenario, since, Interface dictionary has both V4 and V6 addresses, the ALT IP definition can also have v4 and v6 addresses. But both have to be defined in separate ALT dictionary, pointing to it's parent dictionary.

FIPV4

Floating IP on the Alternate IP

If a floating IP is associated with the ALT (alternate/additional) IP, the value against this field must contain the floating IP.

Note: The RNat flag which is defined in interface dictionary is an interface-wide entity. If the RNat flag is disabled in interface dictionary, the FIP value provided in the ALT IP definition is not considered while populating the metaVariables for this port.

Cluster IP

A new Metadata parameter ClusterIp is added, which is used for Redundancy Group (RG) formation during startup. You must pass HA0 IP of one of the nodes of RG as ClusterIp parameter.

ClusterIp: "<RG_IP>"

Cluster IP Parameters

 

ParameterDescription
ClusterIpClusterIP is used for Redundancy Group (RG) formation on startup.  

UserData Format

{
 "CERole" : "CERole",
 "CEName" : "CEName",
 "SystemName" : "SystemName",
 "SbcPersonalityType" : "SbcPersonalityType",
 "EmsUsername" : "EmsUsername",
 "EmsPassword" : "EmsPassword",
 "EmsIP" : "EmsIP",
 "EmsDownloadConfig" : "EmsDownloadConfig",
 "ConfigDownloadName" : "ConfigDownloadName",
 "EmsPrivateNodeParameters" : { "cluster_id": "","vnfc_id":""}
}

The Userdata JSON is present under the write_file directory /opt/sonus/userData.json.

Example of Userdata

{
  "CERole"                  : "ACTIVE",
  "CEName"                  : "vsbc1",
  "SystemName"              : "vsbcsystem",
  "SbcPersonalityType"      : "msbc",
  "EmsUsername"             : "restuser",
  "EmsPassword"             : "sonus123",
  "EmsIP"                   : [ "10.54.58.184", "10.54.58.185" ],
  "EmsDownloadConfig"       : "True",
  "ConfigDownloadName"      : "savedMSBCconfiguration",
  "EmsPrivateNodeParameters": { "cluster_id": "MSBC" , "vnfc_id": "Msbc1_N1" }
}

OpenStack Userdata Parameter Description

 
ParameterLengthExampleDescription
CERoleN/AActive

Assigned role of SBC instance.

Allowed Value:

  • Active
  • Standby

CEName

64

vsbc1

Specifies the actual CE name of the SBC instance. For more information, see System and Instance Naming Convention.

CEName Requirements:

  • Must start with an alphabetic character.
  • Only contain alphabetic characters and/or numbers. No special characters.
  • Cannot exceed 64 characters in length

SystemName

26

vsbcSystem

Specifies the actual system name of the SBC instance. For more information, see System and Instance Naming Convention.

System Requirements:

  • Must start with an alphabetic character.
  • Only contain alphabetic characters and/or numbers. No special characters.
  • Cannot exceed 26 characters in length.

SbcPersonalityType

N/A

ssbc

Specifies the SBC personality type.
Allowed Value:

  • isbc
  • ssbc
  • msbc

EmsUsername

N/A

restuser

Specifies the REST log in credentials of EMS.
Default Value: restuser

EmsPassword

N/A

sonus123

Specifies the REST log in credentials of EMS.
Default Value: sonus123

EmsIP

N/A

For IPv4

  • Standalone EMS IP address as - "aaaa:bbbb:cccc:dddd"

  • Geographical Redundancy EMS IP address as:

    ["aaaa:bbbb:cccc:dddd","aaaa:bbbb:cccc:dddd"]

For IPv6

  • Standalone EMS IP address as - "aaaa:bbbb:cccc:dddd::xx"

  • Geographical Redundancy EMS IP address as:

    ["aaaa:bbbb:cccc:dddd::xx","aaaa:bbbb:cccc:dddd::yy"]

Specifies the EMS instance for IPv4 and IPv6 address.

EmsPrivateNodeParameters

64

N/A

Specifies the EMS private node parameters.
cluster_id - Unique to one specific cluster in a cloud environment which can contain one or more SBC instances.
vnfc_id - Unique ID specified for SBC instance.

The cluster ID and vnfc ID both allows hyphen.

EmsDownloadConfig

N/A

True

Whether Configuration needs to be downloaded from EMS.

Default value: True
Allowed Value:

  • True
  • False

ConfigDownloadName

64

savedMSBCconfiguration1

The SBC configuration name can contain only letters, numbers, dashes (-), apostrophes ('), underscores (_), colons (:) and spaces

Meta Variables

Interface related information (contents of Interface and ALT IP definition) provided in userdata and/or metadata is flattened down into key-value pairs, which is used for CLI configuration.

A sample metavariable table for the 4:1 M-SBC is viewed through the following CLI command:

Metavariable Table


The sample metaVariables are used for configuration:

set addressContext default ipInterfaceGroup LIG1 ipInterface LIG1_V4 ipVarV4 IF2.IPV4 prefixVarV4 IF2.PrefixV4 vlanTagVar IF5.VlanId portName pkt0 state enabled mode inService

set addressContext default ipInterfaceGroup LIG2 ipInterface LIG2_V4 ipVarV4 IF3.IPV4 prefixVarV4 IF3.PrefixV4 ipPublicVarV4 IF3.FIPV4 portName pkt1 state enabled mode inService

set addressContext default zone ZONE_AS sipSigPort 3 ipInterfaceGroup LIG2 ipVarV4 IF3.IPV4 ipPublicVarV4 IF3.FIPV4 state enabled

set system dsbc dsbcSigPort ipInterfaceGroup SVzIMSMediaIPv6 ipVarV6 PKT0_V02_ALT_IP_01.IP mode inService state enabled

  • No labels