This object controls the mapping of CPC cause codes to/from SIP cause codes. Specify the following parameters.
To View and Edit Cause Code Mapping
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > Sip Trunk Group > Signaling > Cause Code Mapping. The Cause Code Mapping window is displayed.
The Cause Code Mapping can be checked for each Address Context, for each Zone, for each Sip Trunk Group created or for all the Address Contexts, Zones and Sip Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group.
The Edit Cause Code Mapping window is displayed.
Sip Trunk Group - Signaling - Cause Code Mapping
The following fields are displayed:
Sip Trunk Group - Signaling - Cause Code Mapping parameters
Parameter | Description |
|---|---|
| The name of the CPC to SIP cause mapping profile. Select any one of the option: defaultCpcSip, defaultQ1912CpcSip, defaultRFC3398CpcSip, defaultTs29163CpcSip. |
| The name of the SIP to CPC cause mapping profile. Select any one of the option: defaultQ1912SipCpc, defaultRFC3398SipCpc, defaultSipCpc, defaultTs29163SipCpc. |
| Enable flag to use cause code 168 for route rejection due to ARS blacklisting.
|
| Specifies the name of internal cause to SIP cause mapping profile. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools