You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Back to Configuration - System Provisioning

Back to Category - Call Routing

Back to Call Routing: System Provisioning - Profiles

Back to Profiles - Digit Parameter Handling

In this section:

 

This object is used to define criteria for applying DM/PM (digit manipulation/ parameter manipulation) rules. You can also use this screen to define criteria for applying URI manipulation rules.

For digit manipulation, the matching criteria can be digits in the calling or called numbers, outpulse numbers from SCP queries, generic numbers, and so on. For example, you can provision the

Unable to show "metadata-from": No such page "_space_variables"
 to check if the first three digits of the calling number are 617, or to check if digits 4 through 6 are 723.

For parameter manipulation, the matching criteria is based on the specified parameter type. For example, you can provision the SBC 5000 series to match a specified Calling Party Category (CPC), or match a specified Originating Line Information Parameter (OLIP) value.

To View Dm Pm Criteria

On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Digit Parameter Handling > Dm Pm Criteria. The Dm Pm Criteria window is displayed.

Call Routing - Digit Parameter Handling - Dm Pm Criteria

To Edit Dm Pm Criteria

To edit any of the Dm Pm Criteria in the list, click the radio button next to the specific Dm Pm Criteria name.

Digit Parameter Handling - Dm Pm Criteria Highlighted

The Edit Selected Dm Pm Criteria window is displayed below.

Call Routing - Digit Parameter Handling - Dm Pm Criteria Edit

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Dm Pm Criteria

To create a new Dm Pm Criteria, click New Dm Pm Criteria tab on the Dm Pm Criteria List panel.

Call Routing - Digit Parameter Handling - Dm Pm Criteria Fields

The Create New Dm Pm Criteria window is displayed.

Call Routing - Digit Parameter Handling - Dm Pm Criteria Create Window

The following fields are displayed:

DM PM Criteria

Parameter Description
Name The name of the DM/PM (digit manipulation/parameter manipulation), up to 23 characters.
Criteria Type

Select the criteria type from the drop-down list:

  • Digit
  • Parameter
  • URI

Digit Type

The digit/parameter type to which this DM/PM Criteria entry applies. For digit manipulation, the possible choices are:

  • Calling Number
  • Called Number
  • Pretranslated
  • Redirection
  • Original Called Number
  • Location
  • Redirecting
  • Outpulse Number
  • Billing Number
  • GN: Dialed Digits
  • GN: Destination
  • GN: User Calling, Screened
  • GN: User Calling, Not Screened
  • GN: Redirecting Terminating
  • GN: Ported Dialed
  • GN: Called CES Id
  • GN: Additional Called
  • GN: Additional Connected
  • GN: Additional Calling
  • GN: Additional Original Called
  • GN: Additional Redirecting
  • N: Additional Redirection
  • GN: NQI = 252
  • GN: NQI = 253
  • GN: NQI = 254
  • Two Stage Collected
  • Contractor Number (Generic variant only)
  • GN: Network Provided Number
  • Presentation Number (Generic variant only)
  • From URI
  • Call Directory Number
  • Dialed Number
  • GN: Third Party Number
  • GN: Collect Call Number
  • GM: Local ANI
  • Called IN Number

Parameter Preference Check

The

Unable to show "metadata-from": No such page "_space_variables"
performs applies PM rules based on whether a parameter exists or does not exist. Possible values are:
• Exists—The
Unable to show "metadata-from": No such page "_space_variables"
applies the associated PM rule if the parameter is present in the call parameters.
• Doesn't Exist—The
Unable to show "metadata-from": No such page "_space_variables"
applies the associated PM rule if the parameter is not present in the call parameters.

To Copy Dm Pm Criteria

To copy any of the created Dm Pm Criteria and to make any minor changes, click the radio button next to the specific Dm Pm Criteria to highlight the row.

Digit Parameter Handling - Dm Pm Criteria Highlighted

Click Copy Dm Pm Criteria tab on the Dm Pm Criteria List panel.

Call Routing - Digit Parameter Handling - Dm Pm Criteria Fields

The Copy Selected Dm Pm Criteria window is displayed along with the field details which can be edited.

Call Routing - Digit Parameter Handling - Dm Pm Criteria Copy Window

Make the required changes to the required fields and click Save to save the changes. The copied Dm Pm Criteria is displayed at the bottom of the original Dm Pm Criteria in the Dm Pm Criteria List panel.

To Delete Dm Pm Criteria

To delete any of the created Dm Pm Criteria, click the radio button next to the specific Dm Pm Criteria which you want to delete.

Digit Parameter Handling - Dm Pm Criteria Highlighted

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Call Routing - Digit Parameter Handling - Dm Pm Criteria Delete Confirmation

 

Click Yes to remove the specific Dm Pm Criteria from the list.

 

  • No labels