You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Profile Management

Back to Profile Management - Signaling Profiles

In this section:

The Qos based routing can be applied both from the signaling and the media perspective. The focus is to provide a mechanism to calculate the various KPI used to measure signaling Qos related routing parameters and use them to take intelligent decisions to route a call. There are mechanisms to improve these KPIs or route the call alternately also. Some of the QoS-related parameters (ASR and R-Factor) are already supported by

Unable to show "metadata-from": No such page "_space_variables"
.

The Signaling Qos KPI Profile is associated with a IP Signaling Profile which in turn can be associated to an IP Peer or IP signaling peer group or trunk group as a part of IP Signaling Profile. The following signaling Qos KPI parameters can be modified:

  • ASR - enable/disable
  • Call Limit Utilization - enable/disable
  • Sustained Call Rate Utilization - enable/disable
  • PGRD and Qos - enable/disable
  • KPI Expression

Unable to render {include} The included page could not be found.

To View Signaling Qos Kpi Profile

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Qos Kpi Profile.

The Signaling Qos Kpi Profile window is displayed.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile

 

To Edit Signaling Qos Kpi Profile

To edit any of the Signaling Qos Kpi Profile in the list, click the radio button next to the specific Signaling Qos Kpi Profile name.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Highlighted

 

The Edit Selected Signaling Qos Kpi Profile window is displayed below.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Edit Window

 

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Signaling Qos Kpi Profile

To create a new Signaling Qos Kpi Profile, click New Signaling Qos Kpi Profile tab on the Signaling Qos Kpi Profile List panel.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Fields

 

The Create New Signaling Qos Kpi Profile window is displayed.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Create Window

 

The following fields are displayed:

Signaling Qos Kpi Profile Parameters

Parameter

Description

Name

Specifies the name of the Signaling Qos Kpi Profile.

Profile Active

Specifies whether to enable this Signaling Qos Kpi Profile or not.

The options are:

  • enable
  • disable

Asr

Specifies whether to enable the ASR KPI feature for this Signaling Qos Kpi Profile or not.

The options are:

  • enable
  • disable

Asr Threshold

Specifies the Asr Threshold value for this profile. The value range from 0% to 100%.

Clu

Specifies whether to enable the CLU KPI feature for this profile or not.

The options are:

  • enable
  • disable

Clu Threshold

Specifies the CLU threshold value for this profile. The value range from 0% to 100%.

Scru

Specifies whether to enable the SCRU KPI feature for this profile or not.

The options are:

  • enable
  • disable

Scru Threshold

Specifies the SCRU threshold value for this profile. The value range from 0% to 100%.

Pgrd

Specifies whether to enable the PGRD KPI feature for this profile or not.

The options are:

  • enable
  • disable

Pgrd Threshold

Specifies the PGRD threshold value for this profile. The value range from 50 to 10000 milliseconds.

Kpi Expression

Specifies a short description of the KPI expression for this profile. The value range up to 255 characters. The default value is ASR&&CLU&&SCRU&&PGRD.

To Copy Signaling Qos Kpi Profile

To copy any of the created Signaling Qos Kpi Profile and to make any minor changes, click the radio button next to the specific Signaling Qos Kpi Profile to highlight the row.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Highlighted

 

Click Copy Signaling Qos Kpi Profile tab on the Signaling Qos Kpi Profile List panel.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Fields

 

The Copy Selected Signaling Qos Kpi Profile window is displayed along with the field details which can be edited.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Copy Window

 

Make the required changes to the required fields and click Save to save the changes. The copied Signaling Qos Kpi Profile is displayed at the bottom of the original Signaling Qos Kpi Profile in the Signaling Qos Kpi Profile List panel.

To Delete Signaling Qos Kpi Profile

To delete any of the created Signaling Qos Kpi Profile, click the radio button next to the specific Signaling Qos Kpi Profile which you want to delete.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Highlighted

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Profile Management - Signaling Profiles - Signaling Qos Kpi Profile Delete Confirmation

 

Click OK to remove the specific Signaling Qos Kpi Profile from the list.

 

  • No labels