You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This section helps you to understand the prescribed behavior associated with various 3GPP P-Headers.

To View and Edit P-Header Extensions

On SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Signaling > P-Header Extensions. The P-Header Extensions window is displayed.

The P-Header Extensions can be checked for each Address Context, for each Zone, for each Sip Trunk Group created or for all the Address Contexts, Zones and Sip Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group.

The Edit P-Header Extensions window is displayed.

SIP Carrier Peering - Signaling - P-Header Extensions

The following fields are displayed:

P-Header Extension parameters

Parameter

Description

Use Ingress Orig Ca

Enable to honor P-Orig-CA header received on the ingress side.

  • disabled (default)
  • enabled

Add Egress Orig Ca

Enable to send P-Orig-CA header on the egress side.

  • disabled (default)
  • enabled

Insertp Visited Network ID

Use this parameter to set the P-Visited-Network-ID header value when receiving REGISTER, OOD INVITE and OOD non-INVITE requests from UE before the message is forwarded towards IMS core network (for example, visitedNetwork or “\”Visited Network\””). The value ranges up to 255 characters.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels