You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Back to Table of Contents

Back to Configuring SBC for SNMP

Up to 32 trap targets can be configured on the SBC.

 

To configure the SNMP trap targets, use the following command syntax:

% set oam snmp trapTarget <trapTargetname> ipAddress <ipAddress> port <port number> state <state> targetSecurityLevel <targetSecurityLevel> targetUserName <user name> trapType <inform | v1 | v2 | v3>

 

To view the SNMP trap targets, use the following command syntax:

% show oam snmp trapTarget <trapTargetname>

See following pages for SNMP configuration options using CLI and EMA.

  • No labels