This section specifies the Call Limit Utilization (CLI) signaling quality measurement.
To View and Edit Qoe - Clu
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > Sip Trunk Group > Sip Trunk Advanced > Qoe > Clu. The Clu window is displayed.
The Qoe - Clu can be checked for each Address Context, for each Zone, for each Sip Trunk Group created or for all the Address Contexts, Zones and Sip Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and Sip Trunk Group.
The Edit Clu window is displayed.
Sip Trunk Advanced - Qoe - Clu Edit Window
The following fields are displayed:
Sip Trunk Advanced - Qoe - Clu Parameters
|
|
|---|---|
Critical Qos Clu Limit | Specifies the critical Call Limit Utilization (CLU), below which the call admission should be stopped. The value range from 80 - 100 and the default value is 80. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools