Additional sections:
Use this object to view and/or edit ingress Trunk group for the selected Signaling Profile.
To View and Edit Ingress
On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Signaling Profile > Ingress.
The Signaling - Ingress can be checked for specific Signaling Profile. Choose the desired Signaling Profile from the drop-down box.
Call Routing - Profiles - Signaling Profile - Ingress Main Window
The Ingress window is displayed.
Call Routing - Profiles - Signaling Profile - Ingress Edit Window
The following fields are displayed:
Call Routing - Profiles - Signaling Profile - Ingress Parameters
|
|
|---|---|
Disallow Missing Calling Number | When enabled, the Calling Party Validation feature is enabled, which disallows calls that do not contain a calling party number.
|
Disallow Tns And Trunk Group Originating Carrier Match | When enabled, disallows the calls when the TNS parameter matches the originating carrier assigned to the ingress trunk group.
|
Disallow Without Billing Number | When enabled, disallows the calls to be completed if there is no billing number.
|
Disallow Without Olip | When enabled, all calls without OLIP will be rejected.
|
Discard Redirection Backward Information | When enabled, the PSX informs the SBC to discard the backward redirection information parameter received in REL.
|
Discard Redirection Count For Release | When enabled, the PSX informs the SBC to discard the redirection count parameter.
|
Dont Generate Exit Message | When enabled, controls the generation of the EXM message on the associated ingress trunk group.
|
Enable Redirection Capability | When enabled, redirection capabilities are enabled on the ingress trunk group.
|
Fe Param In Short Form | When enabled, the SBC generates the FE parameter in the short form.
|
Generate Charge Message | When enabled, the PSX generates charge band information for billing purposes and sends the information to the SBC in policy responses on a per-route basis.
|
Generate Cpg For Call Forward Notify | When enabled, PSX instructs the SBC to send CPGs (call progress messages) in a backward direction, releasing the ingress leg.
|
Perform Calling Party Screening | When enabled, the PSX performs calling party screening and retrieves the configured member status from the subscriber table.
|
Perform Cpc Screening | When enabled, the PSX will perform Calling Party Category (CPC) screening to determine if this call should be restricted based on the received CPC.
|
Propagate Egress Channel Info | When enabled, it propagates the egress PSTN channel information in SIP 18x/200 or Final Response messages returned by a SBC to this SIP Server (via the "chan" parameter in the To: field).
|
Propagate Fe Param | When enabled, it controls the propagation of the FE parameter in the backward directions for call arriving on the associated trunk group.
|
Separate Alert From Progress For Sip Interworking | When enabled, controls the propagation of the FE parameter in the backward directions for call arriving on the associated trunk group.
|
Treat Cic0000As No Cic | When enabled, calls arriving with carrier code 0000 are treated as if there is no carrier code.
|
Use Isup Rel On Sus Timer | When enabled, and the called party goes on hook, the SBC starts the SUS (Suspend) timer and releases the call when the SUS timer expires.
|
Validate Gap Type Ported Number | When enabled, the SoftSwitch verifies that the Generic Address Parameter (GAP) type field is set to Ported Number.
|
Make the required changes to the required fields and click Save to save the changes.
Overview
Content Tools