This object contains signaling packet capture devices and admin state. The Signaling Packet Capture data is stored in a ".PKT" file under /var/log/sonus/evlog/evlog location.
In the absence of any device or filter configuration, The Signaling Packet Capture will capture only the SIP/H323 signaling for calls which are traced by Call Trace Filters.
To View and Edit Signaling Packet Capture
On SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.
The Signaling Packet Capture window is displayed.
Troubleshooting - Call Trace - Signaling Packet Capture
The following fields are displayed:
Signaling Packet Capture Parameters
| Parameter | Description |
|---|---|
Signaling Packet Capture Timer | Specifies the signaling packet capture timer in seconds. It describes the call trace timer for both Calls and Error Trace Filters. The value ranges from 0 to 360 seconds and the default value is 180 seconds. |
State | Use this flag to enable/disable Signaling Packet Captures. It also specifies the administrative state of signaling packet capture:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Additional topics:
Overview
Content Tools