Upgrading SBCs in an N:1 Redundancy Group

This section describes the upgrade procedure for SBC instances in an N:1 redundancy group that were orchestrated in an OpenStack environment using Heat templates. "N" can be a value up to 4. A 4:1 deployment has 5 instances. The following procedure shows example data for a full 4:1 deployment. Your implementation could include fewer instances and therefore require fewer steps.

Prerequisites

Perform the following activities prior to upgrading the SBC instances in the redundancy group.

Download the Software Image

Download the required .QCOW2 and .md5 files from the Customer Portal.

Upload the Software Image to OpenStack

To upload the .QCOW2 file to OpenStack, navigate to Project > Compute > Images. For more information, refer to Creating a Glance Image.

Update the Heat Template with Mandatory Login Information

Beginning with release 7.1, you must include SSH keys or passwords for the admin and linuxadmin accounts in the userdata you provide during orchestration of an SBC instance. Therefore during upgrade to release 7.1 from a prior release, an updated Heat template that contains the mandatory keys or passwords must be applied.

Prior to upgrade, you must update the template used to deploy the instance to include the mandatory SSH key or password userdata. The example templates

Check the Status of the Instances

Ensure all the SBC instances (five, in a 4:1 redundancy group) and the EMS are up and running.

To check the instance status in the Instances window, navigate to Project > Compute > Instances in the Horizon GUI.

Identify the Standby Instance

To identify the assigned standby instance, perform the following steps:

1. Log on to CLI of any of the instances as the admin user. Execute the following command and check the value of the parameter assignedRole.  

   > show status system rgStatus
   rgStatus vsbc1-192.168.2.3 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          1;
       serviceId       0;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.3;
       appVersion      V07.02.00;
   }
   rgStatus vsbc1-192.168.2.4 {
       actualCeName    vsbc1;
       assignedRole    standby;
       currentRole     standby;
       nodeId          2;
       serviceId       1;
       syncStatus      unprotectedRunningStandby;
       usingMetavarsOf vsbc1-192.168.2.4;
       appVersion      V07.02.00;
   }
   rgStatus vsbc1-192.168.2.5 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          3;
       serviceId       2;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.5;
       appVersion      V07.02.00;
   }
   rgStatus vsbc1-192.168.2.6 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          4;
       serviceId       3;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.6;
       appVersion      V07.02.00;
   }
   rgStatus vsbc1-192.168.2.7 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          5;
       serviceId       4;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.7;
       appVersion      V07.02.00;
   }

Upgrade Process

Perform the following steps to upgrade, beginning on the standby instance.

1. Perform sbxstop on the instance you are upgrading.

2. In OpenStack, use either the Horizon dashboard or the CLI to shut down (Shut off Instance option in Horizon) the instance. 

3. In OpenStack, use either the Horizon dashboard or the CLI (heat stack-update command) to update the stack using the template you modified to include login userdata. 

4. Use the new VM UUID to generate a new license file bundle and install the license. To regenerate a license based on a new UUID, follow the license instructions that you received when licenses were originally purchased. Refer to License Management - Node Locked License Settings for information on installing the new license on the instance using EMA.

5. Repeat steps 1 to 4 to upgrade the active instances, one by one. Before upgrading an instance, check the syncStatus field in the output of the rgStatus command to ensure that all the currently active instances are in the syncCompleted state. The standby instance displays syncStatus as unprotectedRunningStandby. For more information, see Upgrading SBCs in an N:1 Redundancy Group.

6. Once the stack updates are completed, all the instances will be running the upgraded image.

Post-Upgrade Monitoring

To verify if the instances are up and running with the upgraded software image:

1. Log on to CLI of any of the instances as admin user.

2. Execute the following command and check the appVersion field for each of the instances. Check syncStatus field in rgStatus output to ensure that all the currently active instances are in syncCompleted state. The standby instance displays syncStatus as unprotectedRunningStandby.

   > show status system rgStatus
   rgStatus vsbc1-192.168.2.3 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          1;
       serviceId       0;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.3;
       appVersion      V08.00.00;
   }
   rgStatus vsbc1-192.168.2.4 {
       actualCeName    vsbc1;
       assignedRole    standby;
       currentRole     standby;
       nodeId          2;
       serviceId       1;
       syncStatus      unprotectedRunningStandby;
       usingMetavarsOf vsbc1-192.168.2.4;
       appVersion      V08.00.00;
   }
   rgStatus vsbc1-192.168.2.5 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          3;
       serviceId       2;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.5;
       appVersion      V08.00.00;
   }
   rgStatus vsbc1-192.168.2.6 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          4;
       serviceId       3;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.6;
       appVersion      V08.00.00;
   }
   rgStatus vsbc1-192.168.2.7 {
       actualCeName    vsbc1;
       assignedRole    active;
       currentRole     active;
       nodeId          5;
       serviceId       4;
       syncStatus      syncCompleted;
       usingMetavarsOf vsbc1-192.168.2.7;
       appVersion      V08.00.00;
   }