In this section:

Related articles:

 

Use this profile to configure the SBC SWe active profile name using the built-in standard profiles.

 

Note

This feature is only applicable when four or more vCPUs are configured. 

Note

An active profile cannot be deleted.

Service Impacting:

The active system (and standby system in HA configuration) system is rebooted. All active calls are lost during this process.

Standard profiles make some assumptions regarding the traffic model and hence may not be the optimal profile for the deployment of the I-SBC. Please create a custom traffic profile that matches the actual traffic offered to the I-SBC to get the maximum capacity.

 

For SBC SWe Cloud (D-SBC), the profiles are automatically configured based on the personality. Auto-configuring a profile prevents reboot during instantiation.

SBC SWe Cloud Automatic Configuration

Personality Type
Profile Name
I-SBCdefault
S-SBCstandard_signaling_profile
M-SBCstandard_msbc_profile
 

Command Syntax

The system sweActiveProfile CLI syntax is shown below.

% set system sweActiveProfile name <profile name>
	default 
	standard_callmix_profile 
	standard_msbc_profile 
	standard_passthrough_profile 
	standard_signaling_profile 
	standard_transcoding_profile
	standard_highcps_callmix_profile

 

Command Parameters

 

SBC SWe Active Profile Parameters Profiles

Profile
Description
defaultBy default, non-cloud I-SBC instances use the default profile. This profile supports a call mix containing a combination of 98% pass-through and 2% transcoding.
standard_callmix_profile

This profile supports a call mix containing a combination of 90% pass-through and 10% transcoding.

standard_msbc_profile

This profile gets auto-configured on the cloud-based M-SBC instance.This profile utilizes the vCPUs for pass-through calls.

standard_passthrough_profile

This profile utilizes the vCPUs primarily for pass-through calls.

standard_signaling_profileThis profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the cloud-based S-SBC instance.
standard_transcoding_profileThis profile utilizes the vCPUs for transcoding calls.
standard_highcps_callmix_profile

This profile is similar to standard passthrough profile with higher CPS.

Command Example

Activate a traffic profile using the SWe Active Profile 

set system sweActiveProfile name standard_transcoding_profile 
commit

The following warnings were generated:
'system sweActiveProfile': To Activate the Profile system will be rebooted.All active calls will be lost during this process. Do you wish to continue?
Proceed? [yes,no]yes
Note

For information on the procedure to set activate a custom GPU profile, refer to the section "Configure GPU I-SBC on Openstack" section of the page Configuring SBC SWe Cloud for GPU Transcoding.

 

  • No labels