In this section:
Use this profile to configure the SBC SWe active profile name using the built-in standard profiles.
This feature is only applicable when four or more vCPUs are configured.
An active profile cannot be deleted.
The active system (and standby system in HA configuration) system is rebooted. All active calls are lost during this process.
Standard profiles make some assumptions regarding the traffic model and hence may not be the optimal profile for the deployment of the I-SBC. Please create a custom traffic profile that matches the actual traffic offered to the I-SBC to get the maximum capacity.
For SBC SWe Cloud (D-SBC), the profiles are automatically configured based on the personality. Auto-configuring a profile prevents reboot during instantiation.
SBC SWe Cloud Automatic Configuration
Personality Type | Profile Name |
---|---|
I-SBC | default |
S-SBC | standard_signaling_profile |
M-SBC | standard_msbc_profile |
The system sweActiveProfile
CLI syntax is shown below.
% set system sweActiveProfile name <profile name> default standard_callmix_profile standard_msbc_profile standard_passthrough_profile standard_signaling_profile standard_transcoding_profile standard_highcps_callmix_profile
SBC SWe Active Profile Parameters Profiles
Profile | Description |
---|---|
default | By default, non-cloud I-SBC instances use the default profile. This profile supports a call mix containing a combination of 98% pass-through and 2% transcoding. |
standard_callmix_profile | This profile supports a call mix containing a combination of 90% pass-through and 10% transcoding. |
standard_msbc_profile | This profile gets auto-configured on the cloud-based M-SBC instance.This profile utilizes the vCPUs for pass-through calls. |
standard_passthrough_profile | This profile utilizes the vCPUs primarily for pass-through calls. |
standard_signaling_profile | This profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the cloud-based S-SBC instance. |
standard_transcoding_profile | This profile utilizes the vCPUs for transcoding calls. |
standard_highcps_callmix_profile | This profile is similar to standard passthrough profile with higher CPS. |
Activate a traffic profile using the SWe Active Profile
set system sweActiveProfile name standard_transcoding_profile commit The following warnings were generated: 'system sweActiveProfile': To Activate the Profile system will be rebooted.All active calls will be lost during this process. Do you wish to continue? Proceed? [yes,no]yes
For information on the procedure to set activate a custom GPU profile, refer to the section "Configure GPU I-SBC on Openstack" section of the page Configuring SBC SWe Cloud for GPU Transcoding.