You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

In this section:

Related articles:

 

Use this profile to configure the

Unable to show "metadata-from": No such page "_space_variables"
 active profile name using the built-in standard profiles.

 

Note

This feature is only applicable when four or more vCPUs are configured. 

Note

An active profile cannot be deleted.

Service Impacting:

The active system (and standby system in HA configuration) system is rebooted. All active calls are lost during this process.

 

 

For 

Unable to show "metadata-from": No such page "_space_variables"
 (D-SBC), the profiles are automatically configured based on the personality. These profiles prevent reboot during instantiation.

SBC SWe Cloud Automatic Configuration

Personality Type
Profile Name
I-SBCdefault
S-SBCstandard_signaling_profile
M-SBCstandard_msbc_profile
 

Command Syntax

The system sweActiveProfile CLI syntax is shown below.

% set system sweActiveProfile name <profile name>
	default 
	standard_callmix_profile 
	standard_msbc_profile 
	standard_passthrough_profile 
	standard_signaling_profile 
	standard_transcoding_profile
	standard_highcps_callmix_profile

 

Command Parameters

Note

Once the distribution of vCPUs is set,

Unable to show "metadata-from": No such page "_space_variables"
overload behavior functions the same way as the
Unable to show "metadata-from": No such page "_space_variables"
hardware platforms.

SBC SWe Active Profile Parameters Profiles

Profile
Description
defaultBy default, non-cloud instances use the default profile. This profile retains the SBC SWe behavior of earlier release (5.0.x and 5.1.x releases), where signaling and media vCPUs overlap.
standard_callmix_profile

This profile supports a call mix containing a combination of 90% pass-through and 10% transcoding.

standard_msbc_profile

This profile gets auto-configured on the cloud-based M-SBC instance.This profile utilizes the vCPUs for pass-through calls.

standard_passthrough_profile

This profile utilizes the vCPUs primarily for pass-through calls.

standard_signaling_profileThis profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the cloud-based S-SBC instance.
standard_transcoding_profileThis profile utilizes the vCPUs for transcoding calls.
standard_highcps_callmix_profile

This profile is similar to standard passthrough profile with higher CPS.

Modified: for 6.2.1

Command Example

Activate a traffic profile using the SWe Active Profile 

set system sweActiveProfile name standard_transcoding_profile 
commit

The following warnings were generated:
'system sweActiveProfile': To Activate the Profile system will be rebooted.All active calls will be lost during this process. Do you wish to continue?
Proceed? [yes,no]yes

 

  • No labels