In this section:
Relay Current Statistics
TCP relay statistics for current interval.
Command Syntax
> show status addressContext <addressContext_name> relayCurrentStatistics
Relay Current Statistics Parameters This field is hard-coded to 'default' because no unique keys are generated for this particular statistic. The current number of TCP connections terminated gracefully. The current number of TCP connections terminated non-gracefully. The current number of new TCP connections established successfully.Command Parameters
Parameter Description key connTermGracefully connTermNonGracefully newConnCreated
Relay Interval Statistics
TCP relay statistics for specific intervals.
Command Syntax
> show status addressContext <addressContext_name> relayIntervalStatistics
Relay Interval Statistics Parameters The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for configuration details. This field is hard-coded to 'default' because no unique keys are generated for this particular statistic. System up-time when the interval statistic is collected.Command Parameters
Parameter Description number key connTermGracefully The number of TCP connections terminated gracefully for the specified interval. connTermNonGracefully The current number of TCP connections terminated non-gracefully for the specified interval. intervalValid A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval. newConnCreated The current number of new TCP connections established successfully for the specified interval. time
Relay Session Statistics
TCP Relay session statistics.
Command Syntax
> show status addressContext <addressContext_name> relaySessionStats
Relay Session Statistics Parameters The IP address and port number of peer from where TCP connection is received. The index of the TCP relay port.Command Parameters
Parameter Description dataRxTx The Number of application data packets received and sent. inboundLocalPeer SBC Ingress relay port IP address and port number. inboundRemotePeer inboundZone Ingress Zone name. outboundLocalPeer SBC Egress relay port IP address and port number. outboundRemotePeer The IP address and port number of Peer where TCP connection is established from SBC. outboundZone Egress Zone name. packetRxTx The Number of TCP packets received and sent. transId
Overview
Content Tools