REST API Method: POST /rest/enmsignalingprofile/{identifier}
Modifies a CAS E and M Signaling Profile given a specific ID.
Note
The CAS E and M Signaling Profile identifier can only be within the range 10001-15000 (inclusive)
URL:
https://134.56.227.163/rest/enmsignalingprofile/{identifier}
HTTP Method
POST
Requires Authentication:
true
Parameters
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| Description | No | No | string | none | 64 - Max Length | A description of the profile. |
| Orientation | Yes | No | Enum | 0 | Possible values:
| Set the CAS signaling orientation. Set to User if connected to a PSTN; Set to Network if connected to a PBX. |
| IncomingStartDial | Yes | Yes | Enum | 0 | Possible values:
| Used to configure the type of E&M protocol for incoming calls. |
| OutgoingStartDial | Yes | Yes | Enum | 0 | Possible values:
| Used to configure the type of E&M protocol for outgoing calls. |
| DTMFOnTime | Yes | No | int | 100 | Possible values:
| Used to set how long DTMF tones are on. The value specifies the time in milliseconds. |
| DTMFOffTime | Yes | No | int | 100 | Possible values:
| Used to set how long DTMF tones are off. The value specifies the time in milliseconds. |
| InterDigitTimeout | Yes | No | int | 500 | Possible values:
| Used to set the timeout time between dialed numbers. The value specifies the timeout period in milliseconds. |
Helpful Tip
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource
Usage Example: (about cURL | requires a session token)
Put code example here
Response:
Put Code response here
Overview
Content Tools