In this section:
This section provides information on the
Unable to show "metadata-from": No such page "_space_variables"
package content and required tools to rack mount the Unable to show "metadata-from": No such page "_space_variables"
chassis.Required Tools
Before you install the
Unable to show "metadata-from": No such page "_space_variables"
chassis into a rack, make sure that you have the following tools and equipment readily available:- #2 Phillips screwdriver (to install brackets and the chassis)
- 7/16" (11 mm) wrench (to attach earth ground lug)
- Label maker (to label cables, if needed)
- Voltmeter (for installing units with DC power supplies)
- A marker or masking tape to mark mounting holes
SBC 7000 Package Content
Unpack and inspect your equipment and hardware to verify you have all the necessary items to install your
Unable to show "metadata-from": No such page "_space_variables"
chassis.
Due to the size and weight of the
Unable to show "metadata-from": No such page "_space_variables"
chassis, at least two people are required when lifting, mounting or unmounting the chassis.Accessory Kit
The Bill of Materials (BOMs) for the
Unable to show "metadata-from": No such page "_space_variables"
Accessory Kit is:BOM Details
Item Number | Item Description | Quantity |
|---|---|---|
| 501-00526 | LUG 2 HOLE, #3-#4 AWG, 90° ANGLE TONGUE, 1/4" STUD HOLE, 1/2"-5/8" HOLE SPACING | 1 |
| 401-00119 | CABLE, 9 POS DSUB M-F NULL, MOULDED-3M.-ROHS | 1 |
| 510-00038 |  ESD WRIST STRAP | 1 |
| 510-00056 | WASHER, 1/4 SPLIT LOCK STLS STL-ROHS | 2 |
| 511-00376 | WASHER, FLAT -1/4 REG STLS STL-ROHS | 2 |
| 511-00046 | NUT, HEX 1/4-20 STL STEEL-ROHS | 2 |
| 511-00243 | #6 AWG TERMINAL LUG | 4 |
Do not use fan handles when lifting the chassis.
Carefully remove the contents from the shipping container, and check each item for damage. The
Unable to show "metadata-from": No such page "_space_variables"
is shipped with the items listed below. If any item is missing or damaged, contact your Sonus representative for support.Universal Rack Mount Kit
The fixed mount universal rack mount kit consists of:
| Item | Quantity |
|---|---|
| Fixed Mount Brackets | 2 |
| Rear Mount Support Brackets | 2 |
| 19" Rear Mount Brackets | 2 |
| 23" Rear Mount Brackets | 2 |
| 10-32 X 5/16" flathead Philips screws to affix fixed mount brackets | 6 |
| 10-32 X 5/16" panhead Philips screws to affix rear mount support brackets | 10 |
| 10-32 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| 12-24 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| M5 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| M6 X 3/4" truss head Philips screws with washer to affix to rack, if appropriate | 12 |
| 10-32 cage nuts to affix to rack, if appropriate | 12 |
The following figure depicts the contents of the Universal Rack Mount Kit contents.
Universal Rack Mount Kit
Overview
Content Tools