You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to First Steps

Congratulations on acquiring your 

Unable to show "metadata-from": No such page "_space_variables"
system!

Below is a summary of key steps needed to get your

Unable to show "metadata-from": No such page "_space_variables"
 up and ready for provisioning.

  
      
Create an IP plan

An IP Plan helps you to gather configuration details, such as the IP addresses the management port, HA port and two media ports for

Unable to show "metadata-from": No such page "_space_variables"
Virtual Machine (VM). The media ports are used for SIP and RTP traffic.

See Creating IP Plan for SBC SWe, for help with completing IP plan.

Install VMware ESXi

Before creating a Virtual Machine and installing 

Unable to show "metadata-from": No such page "_space_variables"
images, install VMware ESXi on the host or hosts allocated for the
Unable to show "metadata-from": No such page "_space_variables"
.

Create a VM for SBC

This step involves creating a VM and allocating resources, and configuring a datastore to contain the  Operating System (OS) and Application software. See Configuring Your Network for SBC SWe on VMware for details.


 
Install SBC Application

Perform this action from the Embedded Management Application (EMA). See Installing SBC Application on VMware for step-by-step instructions.

Install License File

Install SBC licenses using the EMA. See System Administration - License Management and Managing SBC Licenses for details.

 


 

Configure your system

You are now ready to configure your

Unable to show "metadata-from": No such page "_space_variables"
for traffic!

A large amount of information is needed to configure your platform. Use the Creating IP Plan for SBC SWe page to help manage this information.

If you would like to set up a basic call flow to test your configuration, see How to Set up a Basic Call Flow.

  • No labels