You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to CLI Configure Mode

Back to Address Context - CLI

In this section:

The RTP Server Table is a table of trusted SIP Servers maintained on the

Unable to show "metadata-from": No such page "_space_variables"
. In certain environments, the receipt of a SIP response such as “18x” from the peer directs the 
Unable to show "metadata-from": No such page "_space_variables"
to decide whether or not to open the media path (for early cut through). This early cut through is allowed from trusted configured RTP Servers.

Command Syntax

% set addressContext <addressContext_name> rtpServerTable <table_name> rtpServer <IP_address> <prefix>

Command Parameters

RTP Server Table Parameters

Parameter

Length/Range

Description

rtpServerTable

1-23

RTP server table name.

rtpServer <ip address> <prefix>

N/A

Use this control to enter:

  • IP address
  • Prefix length, in bits (range: 0-128)

Command Example

% set addressContext AC-1 rtpServerTable RTP_entries1 rtpServer 10.11.12.13 12

% show addressContext AC-1 rtpServerTable
rtpServerTable RTP_entries1 {
    rtpServer 10.11.12.13 12;
}
  • No labels