In this section:
The ERE (Embedded Route Engine) platform is enhanced to support number translations based on host part (contains a fully-qualified domain name) of the SIP headers. IP addresses format is not supported for host-part lookup. It is always recommended to use the fully-qualified domain name. To support this new requirement, SBC retrieves the destination domain from the various SIP headers and sends it to ERE as part of the policy request. The domain name look-up is case insensitive and partial matches are supported, while first priority is always for full match.
The supported destination domain SIP headers are:
R-URI Header
TO Header
Contact Header
The following steps outline how to configure CNAM (ENUM) Dip Criteria
% set profiles digitParameterHandling numberTranslationCriteria CR1 calledUri ABC.com Sonus_NULL Sonus_NULL Sonus_NULL lookupType enumCnam commit
% set global servers enumService ENUMSER1 criteria triggerCriteria CR1 commit
% set global servers enumService ENUMSER1 defaultTreatment applyFinalTreatment serviceType cnam flags active enable commit
% set global servers enumDomainName ims.ABC.com forwardersData 1 forwarderIP 10.54.212.202 forwarderDescription test commit
set global servers enumService ENUMSER1 enumDefinitions privateDomainNameForEnumLookups ims.ABC.com commit
% set global servers enumDomainNameLabel DEFAULT_ZONE_LABEL enumDomainNameId ims.ABC.com commit
% set addressContext default ipAccessControlList rule ENUM sourceIpAddress 10.54.212.202 action accept sourceAddressPrefixLength 32 precedence 1 state enabled commit
For more information on CNAM (ENUM) Dip Criteria, refer to: