In this section:
The Signaling Qos KPI Profile is associated with an IP Signaling Profile which in turn can be associated to an IP Peer or Ip Signaling Peer Group Data or trunk group as a part of IP Signaling Profile.
When the SBC is configured for ePSX, the Ip Signaling Peer Group Data object is not available.
To View Ip Signaling Peer Group Data
On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Ip Signaling Peer Group > Ip Signaling Peer Group Data.
Select the specific Ip Signaling Peer Group from drop-down box on the Ip Signaling Peer Group Data panel.
Call Routing - Profiles - Ip Signaling Peer Group Main Field
The Ip Signaling Peer Group Data window is displayed.
Call Routing - Profiles - Ip Signaling Peer Group Data
To Edit Ip Signaling Peer Group Data
To edit any of the Ip Signaling Peer Group Data in the list, click the radio button next to the specific Ip Signaling Peer Group Data name.
Call Routing - Ip Signaling Peer Group Data Highlighted
The Edit Selected Ip Signaling Peer Group Data window is displayed below.
Call Routing - Profiles - Ip Signaling Peer Group Data Edit
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Ip Signaling Peer Group Data
To create a new Ip Signaling Peer Group Data, click New Ip Signaling Peer Group Data tab on the Ip Signaling Peer Group Data List panel.
Call Routing - Profiles - Ip Signaling Peer Group Data Fields
The Create New Ip Signaling Peer Group Data window is displayed.
Call Routing - Profiles - Ip Signaling Peer Group Data Create Window
The following fields are displayed:
IP Signaling Peer Group Data Parameters
Parameter | Description |
|---|---|
| Specifies the sequence of this Ip Signaling Peer Group Data. |
| Specifies the type of service for this Ip Signaling Peer Group Data. Select inService to use this IP peer. The options are:
|
| Specifies the IP Address of this Ip Signaling Peer Group Data. |
| Specifies the TCP/UDP port value of this Ip Signaling Peer Group Data. |
| Specifies the FQDN value to use for sending egress calls/requests to the IP peer. |
| Specifies the FQDN port number to be used for sending egress calls/requests to the IP peer. |
To Copy Ip Signaling Peer Group Data
To copy any of the created Ip Signaling Peer Group Data and to make any minor changes, click the radio button next to the specific Ip Signaling Peer Group Data to highlight the row.
Call Routing - Ip Signaling Peer Group Data Highlighted
Click Copy Ip Signaling Peer Group Data tab on the Ip Signaling Peer Group Data List panel.
Call Routing - Profiles - Ip Signaling Peer Group Data Fields
The Copy Selected Ip Signaling Peer Group Data window is displayed along with the field details which can be edited.
Call Routing - Profiles - Ip Signaling Peer Group Data Copy Window
Make the required changes to the required fields and click Save to save the changes. The copied Ip Signaling Peer Group Data is displayed at the bottom of the original Ip Signaling Peer Group Data in the Ip Signaling Peer Group Data List panel.
To Delete Ip Signaling Peer Group Data
To delete any of the created Ip Signaling Peer Group Data, click the radio button next to the specific Ip Signaling Peer Group Data which you want to delete.
Call Routing - Ip Signaling Peer Group Data Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Call Routing - Ip Signaling Peer Group Delete Data Confirmation
Click Yes to remove the specific Ip Signaling Peer Group Data from the list.
Overview
Content Tools