You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

In this section:

Related articles:

 

E.164 is an international numbering plan for public telephone systems in which each assigned number contains a country code, a national destination code, and a subscriber number. An E.164 number consists of up to 15 digits and/or characters:

  • DIGITS: 0 ~ 9
  • SPECIAL CHARACTERS: "*", "#"
  • VISUAL SEPARATORS: "-", ".", "(",")"
Some European countries  allow HEX DIGITS ("a" ~ "f"/"A"~"F") in the various numbers. By default, the SBC parses the digit strings, removes the visual characters, truncates the special characters ("*" and "#"), and the Hex Digits (A~F, a~f).

The 

Unable to show "metadata-from": No such page "_space_variables"
supports configuring an E.164 profile to manage the behavior of E.164 Normalization. Use the E164Profile object to configure E.164 profiles which can then be attached to a SIP Trunk Group at the signaling level (refer to SIP Trunk Group - Signaling - CLI for details). Different E.164 profiles can be configured for both Local and Global numbers.

The E.164 Profile provides flexibility to allow/truncate/remove specific characters as part of Normalization as described on this page.

Command Syntax

% set profiles signaling E164Profile <profile name>
	sonusE164ProfCharDot <allow | remove | truncate>
	sonusE164ProfCharHash <allow | remove | truncate>
	sonusE164ProfCharHyphen <allow | remove | truncate>
	sonusE164ProfCharLeftCircularBracket <allow | remove | truncate>
	sonusE164ProfCharNonFirstPlus <allow | remove | truncate>
	sonusE164ProfCharRightCircularBracket <allow | remove | truncate>
	sonusE164ProfCharStar <allow | remove | truncate>
	sonusE164ProfDigitA <allow | remove | truncate>
	sonusE164ProfDigitB <allow | remove | truncate>
	sonusE164ProfDigitC <allow | remove | truncate>
	sonusE164ProfDigitD <allow | remove | truncate>
	sonusE164ProfDigitE <allow | remove | truncate>
	sonusE164ProfDigitF <allow | remove | truncate>

% delete profiles signaling E164Profile <profile name>

Command Parameters

The E164 Profile parameters are described below:

E164 Profile Parameters

Parameter
Length/Range
Description
<E164 profile name>1-23The name of the E164 profile.
sonusE164ProfDigitAN/A

Use this parameter to specify whether Hex character "A"/"a" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfDigitBN/A

Use this parameter to specify whether Hex "B"/"b" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfDigitCN/A

Use this parameter to specify whether Hex "C"/"c" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfDigitDN/A

Use this parameter to specify whether Hex "D"/"d" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfDigitEN/A

Use this parameter to specify whether Hex "E"/"e" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfDigitFN/A

Use this parameter to specify  whether Hex "F"/"f" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfCharNonFirstPlusN/A

Use this parameter to specify  whether Non First "+ " is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfCharStarN/A

Use this parameter to specify  whether character "*" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfCharHashN/A

Use this parameter to specify whether character "#" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove
  • truncate (default)
sonusE164ProfCharHyphenN/A

Use this parameter to specify whether character "-" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove (default)
  • truncate
sonusE164ProfCharDotN/A

Use this parameter to specify  whether character "." is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove (default)
  • truncate
sonusE164ProfCharLeftCircularBracketN/A

Use this parameter to specify  whether character "(" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove (default)
  • truncate
sonusE164ProfCharRightCircularBracketN/A

Use this parameter to specify whether character ")" is allowed, removed or truncated to the previous allowed digit/character" for this E164Profile.

  • allow
  • remove (default)
  • truncate

  • No labels