You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Perform the following procedure to create a Distributed Switch:

  1. From vCenter Home, select the Datacenters from the navigation pane.

    vCenter Home Screen

    The Datacenters list displays.

  2. From the Objects tab (or navigation pane), click your datacenter.

    Datacenter Home

    The Datacenter screen displays for your selected datacenter defaulted to the "Getting Started" tab.

  3. From Basic Tasks list, select Create a distributed switch.

    Datacenter Screen

    The New Distributed Switch dialog displays.

    For the next several steps, you will create a distributed switch for each type of interface in the order shown below. The examples shown below are for VDS-MGMT distributed switch. If server has more than 4 physical NIC ports, you can opt to assign  VDS-MGMT label to vSwitch1, VDS-HA to vSwitch2, VDS-PKT0 to vSwitch3 and VDS-PKT1 to vSwitch4.

    • vSwitch0 - VDS-MGMT
    • vSwitch1 - VDS-HA
    • vSwitch2 - VDS-PKT0
    • vSwitch3 - VDS-PKT1
  4. Select the Name field and enter distributed switch name, then click Next. (New Distributed Switch, step 1).

    New Distribution Switch Dialog

    The Select Version screen displays.

  5. Select distributed switch version 5.1.0, and click Next.

    Select Distributed Switch Version

    The Edit Settings screen displays.

  6. Make the following choices, and then click Next:

    1. Number of uplinks: 4
    2. Network I/O Control:"Enabled"
    3. Default port group: enabled (checked)
    4. Port group name: Enter the name for your port group.

      Edit Settings Screen

  7. Verify your settings from step 4 "Ready to complete". When satisfied, click Finish

    Verify Settings



  8. Repeat steps 4-7 to create distributed switches for VDS-HA, VDS-PKT0 AND VDS-PKT1 interfaces.

 Continue to Add and Manage Hosts.

 

  • No labels