This section specifies the ASR signaling quality measurement.
To View and Edit Qoe - Asr
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Qoe > Asr. The Asr window is displayed.
The Qoe - Asr can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.
The Edit Asr window is displayed.
H323 Trunk Advanced - Qoe - Asr Edit Window
The following fields are displayed:
H323 Trunk Advanced - Qoe - Asr Parameters
|
|
|---|---|
| Specifies the default value to be used as ASR when no calls are made for a sampling period. The value range from 0 - 100 and the default value is 90. |
| Specifies the critical ASR limit, below which the call admission should be stopped. The value range from 0 - 70 and the default value is 40. |
| Specifies the major ASR limit, below which the call admission should be reduced. The value range from 0 - 90 and the default value is 70. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools