You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

 

The 

Unable to show "metadata-from": No such page "_space_variables"
hardware platform comes equipped with four media ports and is available in three models based on the media port configuration. Customers must purchase the appropriate model based on their interface and capacity requirements. The media ports are enabled on the chassis depending upon the network interface license installed.

SBC 5400 Interface Modes and Media Port Assignments

Interface ModePort Assignments
(Active Media Ports)		SFP TypesLicense Required
1x10Gb

0

10Gb SFP in Media Port 0

SBC-1X10GMP
2x1Gb

0, 1

1Gb SFPs in Media Port 0 and 1

None. Enabled by default

4x1Gb 0, 1, 2. 3

1Gb SFPs in all four media ports

SBC-4X1GMP

Media Ports Speed and Descriptions

Media Port SpeedDescription
10 Gbps
  • Pkt0 runs at 10 Gbps
  • Pkt1, Pkt2, and Pkt3 are inactive
1 Gbps

In 4x1Gbps mode:

  • Pkt0, Pkt1, Pkt2, and Pkt3 run at 1 Gbps and all the four ports are configurable.
  • Pkt2 and Pkt3 ports will not operate without the 4x1Gbps license.

In 2x1 Gbps mode:

  • Pkt0 and Pkt1 run at 1 Gbps
  • Pkt2 and Pkt3 are inactive

In 10 Gbps mode, only media0 is configurable and operable.

  • 2 x 1 Gbps mode is a default mode that any SBC 5400 platform can use. A license is required to use both 4 x 1 Gbps and 1 x 10 Gbps modes.
  • If there is no license, only ports 0 and 1 are operable.

Media port speed is user-configurable. The following licenses support the media port configurations:

  • SBC-4X1GMP – This license allows four 1 Gbps media ports.
  • SBC-1X10GMP – This license allows one 10 Gbps media port.

Info

Refer to SBC 5400 Hardware Platform Specifications and Connecting SBC 5400 Ethernet and Data Cables for additional hardware details.

Refer to Managing SBC Licenses for licensing details.

 

Customers may upgrade or change the licensed network interfaces on their

Unable to show "metadata-from": No such page "_space_variables"
 systems after initial purchase as below, as needed.

SBC 5400 Network Interface Upgrade Options

FromTo
2x1Gb4x1Gb
2x1Gb1x10Gb
4x1Gb1x10Gb
1x10Gb4x1Gb

Note

A media port operating in 10GbE mode supports 10Gb/s speed, full-duplex only and auto-negotiations is unsupported in this mode. Media ports operating in 1GbE mode supports operation at 1Gb/s speed, full duplex mode only with auto-negotiation enabled. 

Any changes to the media port speed, deletes the existing configuration. To use the option, Enable 10G Media Speed, power off the host first.

SBC 5400 Media Interface Upgrades

This section explains the procedures to upgrade the Media Interfaces in SBC 5400.

Media Interface Upgrade from 1x10GB to 4x1GB

Pre-requisites

  1. SBC 5400 should be running a 05.01.00 or higher build.

 

SBC 5400 is running a 05.01.00 or higher build

 

 

 

  • No labels