You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This section specifies the parameters of SILC traffic control configuration.

To View and Edit Call Reservation - SILC

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Call Reservation > SILC. The SILC window is displayed.

The SILC can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down list to select the desired Address Context, Zone and H323Trunk Group.

The Edit SILC window is displayed.

H323 Trunk Advanced - Call Reservation - SILC Edit Window

The following fields are displayed:

H323 Trunk Advanced - Call Reservation Parameters


Parameter


Description

StateAdministrative state to enable/disable the SILC traffic control.
MC1PercentSpecifies the percentage of calls to accept when the machine congestion level is 1. Enter value in range of 0-100 percent. Default is 75.
MC2PercentSpecifies the percentage of calls to accept when the machine congestion level is 2. Enter value in range of 0-100 percent. Default is 25.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels