Additional section:
In this section:
A zone is used to group a set of objects unique in a particular customer environment. You can configure at most only one SIP signaling port or H.323 port in a zone. A zone can also be referenced by a SIP or H.323 trunk Group.
Note
Trunk group names must be unique across all address contexts, zones, and trunk group types.
Note
IP peer names must be unique across all address contexts, and zones.
To View Zone
On SBC main screen, go to Configuration > System Provisioning > Category: Base Provisioning > Zone. The Zone window is displayed.
System Provisioning - Zone
The Zone can be checked for each Address Context or for all the Address Contexts created. Use the drop-down box to select the desired Address Context.
Zone Main Field
To Edit Zone
To edit any of the Zones in the list, click the radio button next to the specific Zone name.
Zone Highlighted
The Edit Selected Zone window is displayed below.
Zone Edit Window
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Zone
To create a new Zone, click New Zone tab on the Zone List panel.
Zone Fields
The Create New Zone window is displayed.
Zone Create Window
The following fields are displayed:
Zone Parameters
|
|
|---|---|
| Specifies the name of the zone. Must be 1-23 characters. The value ranges up to 23 characters. Zone name is unique across all address contexts. |
| Unique ID of this zone. The value ranges from 1 to 4096. Zone ID is unique across all address contexts. |
| The name of the DNS group. Select the DNS group from the drop-down list. |
Remote Device Type | Specifies the type of device facing this Zone. The options are:
|
Domain Name | Specifies the name of the fully qualified domain name for this Zone. The value ranges up to 63 characters. |
Dialog Transparency | This parameter specifies if dialog transparency is enabled for SIP messages processed in that zone. If enabled, SBC sends "Call-ID", "From" tag, and "To" tag transparently in the outgoing message. The parameter To enable Dialog Transparency for a zone, first disable all Sip Sig Port for that zone. |
To Delete Zone
To delete any of the created Zone, click the radio button next to the specific Zone which you want to delete.
Zone Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Zone Delete Confirmation
Click OK to remove the specific Zone from the list.
Overview
Content Tools