You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to Troubleshooting

Back to Troubleshooting - Call Trace Logs and Monitors

Back to Call Trace Logs and Monitors - Monitor Configuration

In this section:

Specifies the status of the Monitor Target settings.

To View Monitor Target

On SBC main screen, go to Troubleshooting > Call Trace/Logs/Monitors > Monitor Configuration > Monitor Target.

The Monitor Target window is displayed.

Troubleshooting - Monitor Target

To Edit Monitor Target

To edit any of the Monitor Target in the list, click the radio button next to the specific Monitor Target name.

Troubleshooting - Monitor Target Highlighted

The Edit Selected Monitor Target window is displayed below.

Troubleshooting - Monitor Target Edit

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Monitor Target

To create a new Monitor Target, click New Monitor Target tab on the Monitor Target List panel.

Troubleshooting - Monitor Target Field

The Create New Monitor Target window is displayed.

Troubleshooting - Monitor Target Create

The following fields are displayed:

Monitor Target Parameters

Parameter

Description

Name

Specifies the name of the target.

Gcid

Specifies the Gcid value that has to be trapped. The value range from 0 - 2147483647.

Monitor
Endpoint

Specifies the name of the endpoint to be used for recording.

Monitor Leg

Specifies which leg to tap.

The options are:

  • ingress
  • egress
  • all (4 legs in gw-gw)
  • both

Duration

Specifies the duration in seconds for which the monitor target will be tapped. The value range from 0 - 65535 seconds.

State

Specifies the administrative state of the monitor target.

The options are:

  • enabled
  • disabled

To Copy Monitor Target

To copy any of the created Monitor Target and to make any minor changes, click the radio button next to the specific Monitor Target to highlight the row.

Troubleshooting - Monitor Target Highlighted

Click Copy Monitor Target tab on the Monitor Target List panel.

Troubleshooting - Monitor Target Field

The Copy Selected Monitor Target window is displayed along with the field details which can be edited.

Troubleshooting - Monitor Target Copy

Make the required changes to the required fields and click Save to save the changes. The copied Monitor Target is displayed at the bottom of the original Monitor Target in the Monitor Target List panel.

To Delete Monitor Target

To delete any of the created Monitor Target, click the radio button next to the specific Monitor Target which you want to delete.

Troubleshooting - Monitor Target Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Troubleshooting - Monitor Target Delete Confirmation

Click OK to remove the specific Monitor Target from the list.

 

  • No labels