You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

In this section:

 

Scenario

In the case of primary path failure due to single 

Unable to show "metadata-from": No such page "_space_variables"
 failure, the IAD is provisioned to automatically use the alternative path.

Background Information

Description

Call Termination with Primary Path Failure

  1. The IAD registers with AS1 through
    Unable to show "metadata-from": No such page "_space_variables"
    -3.
  2. Subscriber is pre-assigned (based on Application Server subscriber data configuration) to AS1, thus
    Unable to show "metadata-from": No such page "_space_variables"
    10 has preset routing for the subscriber to AS1.
  3. From the register, AS1 is informed that the subscriber is reached by
    Unable to show "metadata-from": No such page "_space_variables"
    -3.
  4. The
    Unable to show "metadata-from": No such page "_space_variables"
    -3 goes down and AS1 can not terminate the call to the subscriber until the subscriber re-registers.
  5. The subscriber identifies that the
    Unable to show "metadata-from": No such page "_space_variables"
    -3 is down only when it sends traffic (invite, refresh register etc).
  6. IAD chooses an alternate IP address based on the DNS resolution and opens up a new path to the AS (paths should ideally be geo redundant).
  7. When AS1 receives the terminating call it learns
    Unable to show "metadata-from": No such page "_space_variables"
    -3 is unavailable and utilizes
    Unable to show "metadata-from": No such page "_space_variables"
    -5 path. Hence IAD receives call despite failure of primary path.

  • No labels