You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
Specifies the range of call termination reason codes that, when returned by Egress Signaling, cause the
Unable to show "metadata-from": No such page "_space_variables"
software to attempt to reroute the call.
To View Reason
On SBC main screen, go to Configuration > Profile Management > Category: Call Routing Profiles > Crankback Profile > Reason . The Reason window is displayed.
Select the desired Crankback Profile from the drop-down list to view and edit its respective Reason list.
Security Configuration - Crankback Profile - Reason
To Edit Reason
To edit any of the Reason in the list, click the radio button next to the specific Reason name.
Security Configuration - Crankback Profile - Reason Highlighted
The Edit Selected Reason window is displayed below.
Security Configuration - Crankback Profile - Reason Edit Window
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Reason
To create a new Reason, click New Reason tab on the Reason List panel.
Security Configuration - Crankback Profile - Reason Fields
The Create New Reason window is displayed.
Security Configuration - Crankback Profile - Reason Create Window
The following fields are displayed:
Parameter
| Description
|
---|
Reason Code
| The range of call termination reason codes (or call release codes) that, when returned by Egress Signaling, cause the Unable to show "metadata-from": No such page "_space_variables" to attempt to reroute the call. Must be 0-255. Refer to Call Termination Reason Codes for call termination reason codes list. |
Use Location
Value
| Select the required state: enabled disabled (default)
|
To Delete Reason
To delete any of the created Reason, click the radio button next to the specific Reason which you want to delete.
Security Configuration - Crankback Profile - Reason Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Security Configuration - Crankback Profile - Reason Delete Confirmation
Click OK to remove the specific Reason from the list.