You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Back to Table of Contents

Back to IP Multimedia Subsystem (IMS)

Back to SBC as P-CSCF

Back to P-Headers

P-Sig-Info is a  Sonus proprietary header used to transport various signaling parameters like SGD (Super Generic Digits), UUI (User-to-User Information), Contractor Number, etc. in SIP-I to SIP interworking cases.

The interworking of SGD parameter and SIP P-Sig-Info header is not applicable when the SBC is configured for ERE mode.

The CLI syntax to map various signaling parameters to the P-Sig-Info header is shown below:

  • Map the UUI parameter into the SIP P-Sig-Info header.

    % set profiles signaling ipSignalingProfile <SIP profile name> commonIpAttributes flags mapUuiInPSigInfoHeade enable

  • Map the Contractor Number parameter into the outgoing SIP P-Sig-Info header.

    % set profiles signaling ipSignalingProfile <SIP profile name> egressIpAttributes flags mapContractorNumberInPSigInfoHeader enable

  • Map Called Party Category parameter to outgoing SIP P-Sig-Info header.

    % set profiles signaling ipSignalingProfile <SIP profile name> ingressIpAttributes flags mapCalledPartyCategoryInPSigInfoHeader enable

References:

See following pages for configuration details:

 

  • No labels