You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

 

The 

Unable to show "metadata-from": No such page "_space_variables"
hardware platform comes equipped with four media ports and is available in three models based on the media port configuration. Customers must purchase the appropriate model based on their interface and capacity requirements. The media ports are enabled on the chassis depending upon the network interface license installed.

SBC 5400 Interface Modes and Media Port Assignments

Interface ModePort Assignments
(Active Media Ports)
SFP TypesLicense Required
1x10Gb

0

10Gb SFP in Media Port 0

SBC-1X10GMP
2x1Gb

0, 1

1Gb SFPs in Media Port 0 and 1

None. Enabled by default

4x1Gb 0, 1, 2. 3

1Gb SFPs in all four media ports

SBC-4X1GMP

Info

Refer to SBC 5400 Hardware Platform Specifications and Connecting SBC 5400 Ethernet and Data Cables for additional hardware details.

Refer to Managing SBC Licenses for licensing details.

 

Customers may upgrade or change the licensed network interfaces on their

Unable to show "metadata-from": No such page "_space_variables"
 systems after initial purchase as below, as needed.

SBC 5400 Network Interface Upgrade Options

FromTo
2x1Gb4x1Gb
2x1Gb1x10Gb
4x1Gb1x10Gb
1x10Gb4x1Gb

Note

A media port operating in 10GbE mode supports 10Gb/s speed, full-duplex only and auto-negotiations is unsupported in this mode. Media ports operating in 1GbE mode supports operation at 1Gb/s speed, full duplex mode only with auto-negotiation enabled. 

 

 

  • No labels