You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 11
Next »
The
Unable to show "metadata-from": No such page "_space_variables"
hardware platform comes equipped with four media ports and is available in three models based on the media port configuration. Customers must purchase the appropriate model based on their interface and capacity requirements.
The media ports are enabled on the chassis depending upon the network interface license installed.
SBC 5400 Interface Modes and Media Port Assignments
Interface Mode | Port Assignments (Active Media Ports) | SFP Types | License Required |
---|
1x10Gb | 0 | 10Gb SFP in Media Port 0 | SBC-1X10GMP |
2x1Gb | 0, 1 | 1Gb SFPs in Media Port 0 and 1 | None. Enabled by default |
4x1Gb | 0, 1, 2. 3 | 1Gb SFPs in all four media ports | SBC-4X1GMP |
Media Ports Speed and Descriptions
Media Port Speed | Description |
---|
10 Gbps | - Pkt0 runs at 10 Gbps
- Pkt1, Pkt2, and Pkt3 are inactive
|
1 Gbps | In 4x1Gbps mode: - Pkt0, Pkt1, Pkt2, and Pkt3 run at 1 Gbps and all the four ports are configurable.
- Pkt2 and Pkt3 ports will not operate without the 4x1Gbps license.
In 2x1 Gbps mode: - Pkt0 and Pkt1 run at 1 Gbps
- Pkt2 and Pkt3 are inactive
|
Media port speed is user-configurable. The following licenses support the media port configurations:
- SBC-4X1GMP – This license allows four 1 Gbps media ports.
- SBC-1X10GMP – This license allows one 10 Gbps media port.
Customers may upgrade or change the licensed network interfaces on their
Unable to show "metadata-from": No such page "_space_variables"
systems after initial purchase as below, as needed.
SBC 5400 Network Interface Upgrade Options
From | To |
---|
2x1Gb | 4x1Gb |
2x1Gb | 1x10Gb |
4x1Gb | 1x10Gb |
1x10Gb | 4x1Gb |
Any changes to the media port speed, deletes the existing configuration. To use the option, Enable 10G Media Speed
, power off the host first.