You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Specifies the treatment taken when the modem tone is detected.

To View and Edit Modem

On SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Codec Entry > Modem.

Select the desired Codec Entry from the drop-down list to view its respective Modem parameters.

The Modem window is displayed.

Profile Management - Media Profiles - Codec Entry - Modem

The following fields are displayed:

Codec Entry - Modem Parameters

Parameter

Description

Failure
Handing

Specifies the behavior when a modem tone is detected but the treatment fails for any reason. The behavior can be:
• Disconnect—Release the call.
• Continue—Continue to process the call.

The default setting is Continue.

Tone Treatment

Specifies the treatment taken when the modem tone is detected, which can be:
• none—Do nothing when the modem tone is detected.
• notifyPeer—Notify the peer when the modem tone is detected.
• disconnect—Disconnect the call when the modem tone is detected.
• fallbackToG711—Fall back to G.711 when the modem tone is detected.
• applyFaxTreatment—Treat the modem tone as a fax tone, and apply the fax treatment for the selected codec.
The default setting is None.

For G.711 calls, Notify Peer and Disconnect require a compression resource be allocated.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels