You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »



In this section:

This section provides the information on how to upload application and license files to SBC.

File Upload

The File Upload allows you to upload application files to SBC. These files must be available in your local drive for easy access and faster upload. You can upload the following files:

  • SBC Application Files (.tar, .tar.gz, .md5, and .signature files): Specifies the complete SBC Application files. These are used to upgrade or to perform a fresh SBC installation.
  • ePSX Application Files (.ova and .tar.gz files): Specifies the files required for ePSX Application. The .ova file is used to install ePSX Application and .tar.gz file is used to upgrade ePSX.
  • License Files (.pem, .xml, and .p12 files): Specifies the list of SBC Licenses.
  • Announcement Files (.wav files): Specifies short audio files used when SBC sends the 183 Session Progress in SIP call.

    To know more about uploading announcement files, refer to System Administration - Manage Announcements.

On SBC main screen, go to Administration > System Administration > File Upload. The File Upload screen is displayed.

File Upload Screen

The File Upload screen consists of the following panes:

  • Upload Queue: This pane allows you to add files from your desired location and upload the same to SBC.
  • Files on SBC: This pane lists all the recently uploaded files to SBC with the size of each file.
  • Software Packages on SBC: This pane lists the currently installed/available SBC package along with the size of the package.

By default, only ten entries are displayed in all the panes. You can choose the number of files to view under the Show entries drop-down box.

To Add and Upload Files on the SBC

While uploading large files, EMA may timeout. To prevent EMA from timing out before the file is uploaded, use one of the following ways:

 

To add files to the SBC, perform the following:

  1. Click Add Files to Queue.

    Adding Files to Queue Selection

     

    The File Upload window displays.

  2. Browse and select the file for packaging from your local system or remote server.

    Adding Files to Queue Screen

  3. Click Open to upload the selected file.
    The uploaded files are displayed in the Upload Queue list. The Upload Queue list displays the file name and size for each file that is queued for upload.

    File Upload Queue

  4. Click Upload All Files to upload the all files from the Upload Queue list to the SBC.

    Do not close the screen or browser until the file upload is complete. Similarly, if you perform any other operations on the EMA, this will abort the file upload.

    To abort the uploading process, click Delete icon against the file which you want to remove. The file uploading process stops.

    File Upload Progress

    While uploading the file or package:

    • The file upload status is shown on the Upload Queue list. 
    • If there are any errors during an upload, the error message is also displayed on the Upload Queue list.


    Once the upload progress reaches 100%, the files gets listed in the Files on SBC pane and the packages get listed in Software Packages on SBC pane. The size of each file and the package is also displayed.

    File Upload Installed Package

     

    Proceed to any of the following pages based on your requirement:

    To Install

    Unable to show "metadata-from": No such page "_space_variables"
    Application: Installing SBC Application.

    To Upgrade

    Unable to show "metadata-from": No such page "_space_variables"
    Application: Upgrading SBC Application using EMA or Upgrading SBC Application Using Platform Manager.

    To Install

    Unable to show "metadata-from": No such page "_space_variables"
    Application: SBC 5400 - Installing Application.

To Delete Files from Upload Queue

To delete a file from the Upload Queue list, perform the following:

  1. In the Upload Queue list, click  option against the respective file. A delete confirmation dialog appears.

    Deleting File from File Upload Screen

  2. Click Delete to remove the entry from the Upload Queue pane.

    You can delete any entry in the Upload Queue pane before you click Upload All Files.

To Delete Files from Files on SBC Pane

To delete a file from Files on SBC pane, perform the following:

  1. In the Files on SBC pane, click  option against the respective file. A delete confirmation dialog appears.

    Deleting File from File Upload Screen

  2. Click Delete to remove the entry from the Files on SBC pane.

To Delete Software Packages on SBC Pane

To delete a file from Software Packages on SBC pane, perform the following:

  1. In the Software Packages on SBC pane, click  option against the respective package. A delete confirmation dialog appears.

    Deleting File from File Upload Screen

  2. Click Delete to remove the package from the Software Packages on SBC pane.

    Once the SBC Software Package is removed, there is no way to retrieve the same. You have to re-upload the package.

 

  • No labels