Server Administration - CLI

In this section:

This object allows you to assign server module roles, set the coredump server profile, and perform server actions such as restart, soft reset and start software upgrade.

Command Syntax

% set system serverAdmin <name> 
	coredumpProfile <name> 
	deviceSmartAttribute <integer>
    hwType <0-255 characters>
	modularType <false | true>
	pktPortSpeed <speed1Gbps | speed10Gbps>
	role <primary | secondary>
 
% request system serverAdmin <name>
	forceCoreDump coreDumpType <full | partial>
	removeCoredump coreDumpFilename <file name>
	restart 
	softReset 
	startSoftwareUpgrade
		integrityCheck <perform | skip>
		package <name>
		rpmName <name>
		versionCheck <perform | skip>

Command Parameters (set)

Command Parameters (set)

Parameter	Length/Range	Description
`<serverName>`	N/A	Choose the SBC server name.
`coredumpProfile`	1-23 characters	`<profile name>` – Enter a Core Dump Profile name, or choose the default profile.
`deviceSmartAttribute`	N/A	The smart control attribute value that reports disk life remaining.
`hwType`	0-255 characters	`<hw description>` – Textual description of the SBC hardware type.
`modularType`	N/A	If set to 'true', the SBC uses modular DSPs, `false` `true`
`pktPortSpeed`	N/A	Packet port speed setting. `speed1Gbps` `speed10Gbps`
`role`	N/A	The server module role. When set to 'primary', role designates a server for internal processing. `primary` (default) `secondary`

Command Parameters (request)

Command Parameters (request)

Parameter	Description
`<serverName>`	The unique name of the server.
`forceCoreDump`	Use this command to force the termination of a fixed set of application processes with accompanying core dumps for troubleshooting purposes. By default, a full dump is performed if no option is specified. Before the command executes, the user is prompted to confirm or cancel the operation. If canceled, no further action is taken, and application operation is not affected. `coreDumpType`– Choose an option: `full` (default) – Full set of processes to dump (see Full Application Process List table below). `partial` – Partial set of processes to dump (see Partial Application Process List below).
`removeCoredump`	Use this object to remove the specified coredump from the chosen server. `coredumpFileName <filename>` – The name of the coredump file.
`restart`	Restart the specified server.
`softReset`	Restart the application on the server without rebooting the server.
`startSoftwareUpgrade`	Use this control to start a software upgrade on the specified server. `integrityCheck` – Use this flag to specify whether or not to perform an integrity check (signature validation) against Unable to show "metadata-from": No such page "_space_variables" software updates and patches as they are uploaded to the Unable to show "metadata-from": No such page "_space_variables" system. `perform` (default) `skip` `package` – Name of the new package. `rpmName` – Name of the rpm/package, if different from the file name of the .tar.gz. `versionCheck`– Use this flag to perform/skip version checking during software upgrades. `perform` (default) `skip`

Full Application Process List

CamProcess	ChmProcess	CpxAppProc	DiamProcess
DnsProcess	DsProcess	EmaProcess	EnmProcessMain
FmMasterProcess	IkeProcess	ImProcess	IpmProcess
PathchkProcess	PesProcess	PipeProcess	PrsProcess
RtmProcess	SamProcess	ScmProcess_0	ScmProcess_1
ScmProcess_2	ScmProcess_3	ScpaProcess	SmProcess
SsaProcess	SsreqProcess

Partial Application Process List

DsProcess	PrsProcess	RtmProcess
SamProcess	ScmProcess_0	ScmProcess_1
ScmProcess_2	ScmProcess_3	SmProcess

Command Examples

To display server administration configuration from an

Unable to show "metadata-from": No such page "_space_variables"

system:

admin%sbc01 show system serverAdmin SBC01
coredumpProfile default;
deviceSmartAttrib    0;
role            primary;
modularType     false;
hwType          ConnexIP5200;
pktPortSpeed    speed1Gbps;