You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

 

 

 

 

Use this window to enable or disable flags that specify local ringback tone behavior within a selected Tone and Announcement Profile.

To View and Edit Flags

On the SBC main screen, navigate to All > Profiles > Media > Tone And Announcement Profile > Local Ring Back Tone > Flags.

Select the desired Tone And Announcement Profile from the drop-down list to view its respective Flags parameters.

The Flags window is displayed.

Profile Management - Media Profiles - Local Ring Back Tone - Flags

Note

To view the flag Annoucement Based Tones, the option Signaling Tone Package State must be enabled in Local Ring Back Tone.

 

The following fields are displayed:

Flags Parameters

Parameter Description
Use This Lrbt For Egress

Specifies Lrbt state of the Egress:

  • Disable (default)

  • Enable
Use This Lrbt For Ingress

Specifies Lrbt state of the Ingress:

  • Disable (default)

  • Enable
Dynamic LRBT

Use this flag to play tone locally on receipt of 180 with SDP, until RTP is received from the remote peer. 

  • Disable (default)

  • Enable
Force LRBT

Use this flag to play tone locally on receipt of any 18x with or without SDP, until 200 OK (INVITE) or UPDATE is received from the remote peer.

  • Disable (default)

  • Enable
Announcement Based Tones

Use this flag to play tones as announcements by using stored files. This mode does not use DSP resources.

  • Disable (default)
  • Enable

NOTE: If this flag is disabled, the SBC uses DSP (TNAPAD) to generate and play tones.

With or Without SDP

Use this flag to specify whether to play tones when a P-Early-Media (PEM) header is received in the 18x response, with or without SDP.

  • Disable (default)
  • Enable

 To configure this flag, the Early Media Method flag must be configured as P Early Media.

Early Media Method

This flag is used to specify whether playing tones is governed by receipt of a PEM header.

The options are:

  • P Early Media - the SBC plays tones when it receives a PEM header.
  • None (default) - the SBC is not governed by the PEM header.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

 

  • No labels