The
Unable to show "metadata-from": No such page "_space_variables"
provides a wide range of high density digital signal processor (DSP) modules and a comprehensive set of converged, voice, video, vocoder, fax and data media processing functions. This section describes the possible DSP density values on Unable to show "metadata-from": No such page "_space_variables"
devices (Unable to show "metadata-from": No such page "_space_variables"
, Unable to show "metadata-from": No such page "_space_variables"
, Unable to show "metadata-from": No such page "_space_variables"
, Unable to show "metadata-from": No such page "_space_variables"
, 5400) and the Unable to show "metadata-from": No such page "_space_variables"
device according to their DSP module configurations.Note
Not applicable to the SBC Software Edition.
Channel densities of the
Unable to show "metadata-from": No such page "_space_variables"
and the Unable to show "metadata-from": No such page "_space_variables"
are dynamically determined according to resources (MIPS and memory) required by particular codecs in use. The Unable to show "metadata-from": No such page "_space_variables"
5110, 5210, and 5400 platforms use DSP2x modules.
Comparison of SBC DSP Modules
Two types of DSP cards are used on
Unable to show "metadata-from": No such page "_space_variables"
platforms. The Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
and Unable to show "metadata-from": No such page "_space_variables"
platforms use DSP2x modules, and the Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
and Unable to show "metadata-from": No such page "_space_variables"
use the SPS100 modules. The number of transcoded sessions supported on the DSP2x and SPS100 modules varies by codec. Available platform bandwidth may also limit sessions depending on packet size. The
Unable to show "metadata-from": No such page "_space_variables"
platform uses the high density DSP-LC type of modules.The table below describes the card differences and associated platforms.
SBC Core DSP Models Per Platform
| DSP25 | DSP20 | SPS100 | DSP-LC | |
|---|---|---|---|---|
| SBC Platform | Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" | Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" | Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" Unable to show "metadata-from": No such page "_space_variables" | Unable to show "metadata-from": No such page "_space_variables" |
| Customer Installable |  | |  | |
Maximum number of cards per platform | 4 | 1 | 3 | 4 |
| Hot-swappable | | | | |
Mixing DSP20 and DSP25 cards (both within a chassis and between active/standby servers in HA scenario) is not supported.
For example, if
Unable to show "metadata-from": No such page "_space_variables"
-A contains DSP25 in slot 1-3, Unable to show "metadata-from": No such page "_space_variables"
-B must also have a DSP25 in slots 1-3. As another example, if Unable to show "metadata-from": No such page "_space_variables"
-A has a DSP20 in slot 1, Unable to show "metadata-from": No such page "_space_variables"
-B must not have anything other than a DSP20 in slot 1.Only one DSP20 is allowed in an SBC 5x10 chassis, and it must reside in slot 1.
Additional topics in this section:
Overview
Content Tools