In this section:
Server Admin
The Server Admin table describes the configuration of each server module. A server module can be a standalone server or a server card in a chassis based system.
To view the list of Server Admins, on SBC main screen, go to Administration > System Administration > Server Admin. The Server Admin window is displayed.
Server Admin - Server Admin Window
Note
For 1:1 formation on AWS (supported by the Centralized mode), the Server Admin object of the EMA display results for both active and standby volumes. This is because in Centralized mode, the active and standby volumes are always synchronized with each other.
N:1 formations supported by the Distributed mode is not available on the AWS platform.
For more information on Centralized and Distributed modes, refer to System - Admin.
By default only ten entries are displayed in a view. You can choose the number of entries to be displayed under the Show entries drop down box.
To edit any of Admins listed, click the radio button of the required Admin, the edit window appears:
Server Admin - Edit
The following fields are displayed:
Server Admin Parameters
Parameter | Description |
|---|---|
| Specifies unique name of the server. |
Actual CE Name | The instance name assigned by user (If an instance name is not assigned, this field displays the default instance name.) |
| Select the coredump profile from the drop-down list. |
| Specifies the server module. When set to
|
Modular Type | Specifies the hardware (modular) type of the server. |
Hw Type | Specifies the type of SBC Hardware that you are currently working on. |
Pkt Port Speed | Packet port speed setting
|
Hw Subscription Type | This field stores the SBC SWe subscription type.
NOTE: In case of SBC core running on a hardware/server environment, this parameter displays the Sonus defined hardware type. |
Server Admin Commands
This object allows you to perform the following operation:
Server Admin - Server Admin Commands
The options are:
Admin Commands Parameters
Parameter | Description |
|---|---|
Force Core Dump | Use this command to force the termination of a fixed set of application processes with accompanying core dumps for troubleshooting purposes. By default, a full dump is performed if no option is specified. Before the command executes, the user is prompted to confirm or cancel the operation. If canceled, no further action is taken, and application operation is not affected.
NOTE: This command causes the SBC application to restart. |
Identity | Turn on/off the locator LED of the specified server for the amount of time set with the
|
Remove Coredump | Use this object to remove the specified coredump from the chosen server.
|
| This command restarts a server/CE. |
Soft Reset | Restart the applications on the system without rebooting the server(s). |
Select the desired Admin Command from the list and click Select.
A pop up window appears seeking your confirmation on the command you have selected and its respective fields to be filled/chosen.
Server Admin - Server Admin Command Confirmation
Fill/Choose the required fields if any and click the command button to confirm. A message appears stating the action of the command.
Server Admin - Server Admin Command Confirmation 2
Click Ok to execute the command and exit.
Full Application Process List
CamProcess | ChmProcess | CpxAppProc | DiamProcess |
DnsProcess | DsProcess | EmaProcess | EnmProcessMain |
FmMasterProcess | IkeProcess | ImProcess | IpmProcess |
PathchkProcess | PesProcess | PipeProcess | PrsProcess |
RtmProcess | SamProcess | ScmProcess_0 | ScmProcess_1 |
ScmProcess_2 | ScmProcess_3 | ScpaProcess | SmProcess |
SsaProcess | SsreqProcess |
|
Partial Application Process List
DsProcess | PrsProcess | RtmProcess |
SamProcess | ScmProcess_0 | ScmProcess_1 |
ScmProcess_2 | ScmProcess_3 | SmProcess |
Overview
Content Tools