To create or modify an existing SNMP Management Address:
- In the WebUI, click the Settings tab.
In the left navigation pane, go to SNMP/Alarms > SNMP Management Addresses.
SNMP Management Addresses Table
Modifying SNMP Management Addresses
- Click the expand (
) Icon next to the entry you wish to modify. - Edit the entry properties as required, see details below.
Creating SNMP Management Addresses
Click the Create SNMP Manager Address (
) icon at the top of the SNMP Management Addresses Table page.
Create SNMP Management Address
SNMP Management Address - Field Definitions
Manager Address
Specifies the SMNP Manager IP Address or Fully Qualified Domain Name (FQDN).
SNMP Version
Specifies the SNMP version. Choice of Version 2 or Version 3.
Default is Version 2.
Community
A password used between the SNMP Manager and the agent (SBC Edge).
Hidden when SNMP Version 3 is configured.
Community Type
Read-Only is the only choice available.
USM User name
Username of user's choice.
Hidden when SNMP Version 2 is configured.
Auth Protocol
Default = SHA 1.
Hidden when SNMP Version 2 is configured.
Auth Password
Password of user's choice.
Hidden when SNMP Version 2 is configured.
Confirm Auth Password
Repeat password entered above to confirm.
Priv Protocol
Default is AES 128. Noe: AES 128 must be selected if Auth Protocol is set to anything other than None.
Hidden when SNMP Version 2 is configured.
Priv Password
Password of user's choice.
Hidden when Priv Protocol is set to None or SNMP Version 2 is configured.
Confirm Priv Password
Repeat password entered above to confirm.
Trap Enabled
Specifies whether or not the manager accepts traps.
Default = True.
Overview
Content Tools