You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.

SBC Easy Configuration supports IPv4 only, not IPv6.

The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone.   The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.

The following SIP Trunks are supported:

  • ATT&T IP Flexible Reach
  • Generic SIP Trunk
  • Verizon Managed Service
  • KDDI SIP Trunk
  • Broadsoft Trunk

Broadsoft Trunk is applicable only if the user endpoint is an IP phone.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Step 1 - Select Scenario

These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.

Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).

Scenario -  Field Definitions

Step 1

Application

The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.

Scenario Description

Enter the name to describe the SIP Trunk ↔ IP Phone setup.

This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.

Telephone Country

The country in which the  SIP Trunk ↔ IP Phones originates.

Emergency Services

The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options:  ELIN Identifier, E911/E112 or None.

Emergency Callback Number 1

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

PSAP Number

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

SIP Sessions

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

Name (SIP Trunk)

The SIP trunk used for connection to the IP phones. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, KDDI SIP Trunk and Broadsoft Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint.

Broadsoft Trunk Type

Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.

This field is available only when the SIP Trunk type is Broadsoft Trunk.

User Type (IP Phone Registrar)

IP Phone Registrar. This field is fixed.

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

Generic SIP Trunk - Field Definitions

These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.

Generic SIP Trunk

Border Element Server

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number (Border Element Server)

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Enables or disables the secondary Session Border Controller service provider configured. 

Secondary Border Element Server

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

IP Phone Numbering Plan

Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Defines the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

Port Number (IP Phone)

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Configure a network address and Netmask for the host or subnet in in which the IP phones reside.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

Add Network/Mask

AT&T IP Flexible Reach - Field Definitions

These fields apply if you selected AT&T IP Flexible Reach in Step 1 - Select Scenario.

AT&T IP Flexible Reach


 

Border Element Server

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number (Border Element Server)

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Enables or disables the secondary Session Border Controller service provider configured. 

Secondary Border Element Server

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Forking Feature

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

AT&T IP Toll Free

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

IP Phone Numbering Plan

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

Port Number (IP Phone)

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

Add Network/Mask

Verizon Managed Service - Field Definitions

These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.

Verizon Managed Service

Border Element Server

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP.

Port Number (Border Element Server)

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

IP Phone Numbering Plan

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

Port Number (IP Phone)

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

Add Network/Mask

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

KDDI SIP Trunk

 

SIP Server

 The FQDN or IP address of the Session Border Controller service provider.

Protocol

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Called Prefix

 Used for setting up transformation rules for the FMC service.

Address of Record URI

 Address of Record of the client that is registered on the SIP server.

Static Host

Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port 

Authentication ID

Specifies a user name to use in response to a challenge.

Enter Password

The password for the Authentication ID.

Confirm Password

Re-enter the password for the Authentication ID.

DNS Server IP

 IP address (IPv4 or IPv6) of the DNS server.

Domain Name

 Domain name associated with the DNS IP address.

IP Phone Numbering Plan

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension

Number of Users

 Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

Port Number (IP Phone)

 The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

Add Network/Mask


Broadsoft Trunk - Field Definitions

These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.

Broadsoft Trunk

Server Domain

The FQDN of the server domain.

Enterprise Trunking

Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field.

IP Phone Numbering Plan

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

Port Number (IP Phone)

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

Add Network/Mask

Step 3 - Confirm and Submit Configuration

This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).

This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.

Step 3

  • No labels