Installing an ASM Package

Not supported by SBC SWe Lite in this release.

ASM package updates can be installed by

Unable to show "metadata-from": No such page "_space_variables"

SBC 1000/2000 System Administrators via the web interface. This functionality is typically used under the following circumstances:

Updating the SBC 1000/2000 Communication Service on the ASM
Installing Lync Cumulative Update (CU) patches on the ASM
Installing other Roll-up packs such as windows update authorization lists
Installing approved Third party software (i.e, SDN Listener or Lync debug tools)
Installing a new BIOS package on the ASM

This update will accept signed windows .msi and .msp files as well as published .pkg files

On this page, we show how to install packages on the ASM via the WebUI.

Before you Begin

This operation can only be performed when the Managing the SBC Communication Service becomes operational. In other words, only when a valid ASM IP address has been configured either via the Initial Setup or the ASM IP Settings.

This operation can be accessed either via the Tasks tab or the Settings tab:

ASM Update via Tasks Tab

ASM Update via Settings Tab

In the WebUI, click the Tasks or Settings tab.
In the left navigation pane, under the Application Solution Module, click Install ASM Update.
Browse to the desired .pkg file.
Select the ASM package file you wish to install.

$param1
Click Ok to install the package. The installation progresses. The sequence of installation steps are shown below.

Install ASM Update - Upgrade Progress

Install ASM Update - Current Activity Status

The following message is displayed when the installation is complete.

Install ASM Update - Complete
- If the update is for a windows update .pkg pack, refer to the operation status page to initiate windows update install
- If the installation failed a detailed status message indicating the reason for the failure will be displayed
Verification Tip
- If you have installed an SBC 1000/2000 Communication Service update, verify the update by Viewing the SBC 1000/2000 Communication Service Version.
- If you have installed a Lync SBA CU patch, verify the update by checking the versions of each Lync Service.
- For further information in windows update refer to ASM Roll-up Update

Space shortcuts