You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

You may for various reasons, such as change in your network topology, need to change the IP Address and/or the Default Gateway on your

Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
. You may also wish to configure a Secondary IP Address for the
Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
. A secondary IP address gives the
Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
the ability to be part of another IP subnet on the same Ethernet port. Configuring a Secondary IP Address is accomplished using the same UI elements as changing the IP Address.

The recommended method of changing the

Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
IP and/or Default gateway is through the Tasks Tab in the WebUI. This is because the IP Addresses and Default Gateway IP Address must be changed simultaneously. Other methods of accomplishing this task are strongly discouraged as they will, in all likelihood, result in a loss of communication with the
Unable to show "metadata-from": No such page "_space_variables"
Unable to show "metadata-from": No such page "_space_variables"
.

  • No labels