For SWe Lite Music On Hold, refer to Configuring SBC SWe Lite for Music On Hold
This article explains setting up
Platform | Maximum |
---|---|
Unable to show "metadata-from": No such page "_space_variables" | 1MB |
Unable to show "metadata-from": No such page "_space_variables" | 4MB |
To upload a music (sound) file :
Upload the file using the Uploading a Sound File procedure in Uploading Music on Hold Files.
To connect a live audio source through an FXS port:
Connecting an audio source for Music On Hold requires the use of an adapter between
Music On Hold volume is controlled from the audio source device (iPod, MP3 Player, etc.). The preferred volume level can be adjusted by listening to the stream, or by examining the RTP trace captured from the SIP call leg of the call. Use the receive gain settings on the FXS port to make any additional fine-tuning volume adjustments.
To use Music on Hold, you must specify a source in the Media System Configuration tab of the UI and then Enable Music on Hold in the applicable SIP Signaling Group.
To verify that the file has been successfully uploaded:
The Music on Hold status will be Loaded if the file was successfully uploaded.
Other status' are: