Activating Callmix Profile on SBC SWe

This profile supports callmix which contain a combination of 90% pass-through and 10% transcoding.

To activate callmix profile on SBC SWe:

1. Check the current profile on SBC SWe.

   % show system sweActiveProfile 
   sweActiveProfile default {
       actState active;
   }
   [ok]

   There is an default profile activated on SBC SWe instantiation.

2. Delete the default profile in  sweActiveProfile.

   % delete system sweActiveProfile default 
   [ok]
   The following warnings were generated:
   'system sweActiveProfile': To Deactivate the profile please reboot the systems manually.First the Standby followed by the Active. Do you wish to continue?
   Proceed? [yes,no] yes
   Commit complete.
   [ok]  

   After deleting the default profile in sweActiveProfile, restart the Standby SBC followed by Active SBC.

3. Configure the callmix profile.

   % set system sweActiveProfile standard_callmix_profile actState active 
   [ok]
   The following warnings were generated:
   'system sweActiveProfile': To Activate a Profile we need to reboot the system.Please reboot the system after Activating a Profile Manually. First the Standby followed by the Active. Do you wish to continue?
   Proceed? [yes,no] yes
   Commit complete.
   [ok]

   After configuring the callmix profile in sweActiveProfile, restart the Standby SBC followed by Active SBC.