You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
Command Syntax
> show table profiles services enhancedDblProfile <profile name>
Command Parameters
Enhanced DBL Profile Parameters
Parameter | Description |
---|
profName | The Enhanced DBL Profile name. |
state | Administrative state of this profile. |
ruleName | The name of the rule assigned to this profile. state – Administrative state of this rule.scope – Specifies from which entity the rule criteria is applied to the messages.triggerEventType – The type of offending trigger events.authenticationTimeout badSipMessage receiptOfMessage
methodType – The offending method type.methodResp – The failure response code(s) of the offending event for the given method, which is sent towards the endpoint. This is applicable only for receiptOfMessage .countType – The type of count used. (Only aggrCount is supported at this time)aggrCountValue – The number of offending event occurrences to receive in the defined timer window to trigger a defined action.timerWindow – The period (in seconds) during which the offending event count must match the criteria to trigger an action.consecutive – If enabled, receiving any non-offending event for the trigger increments the internal reset count value. If disabled, receiving configured (resetMethodType + resetMethodResp ) event for the trigger increments the internal reset count value. resetMethodType – The method type for resetting the offending event count.resetMethodResp – Displays one or more responses for the configured method to reset the offending event counter.resetCount – The number of resetting events required to remove the entry from the tracking.type – The action to take when criteria is met for this rule.blacklist rejectWithResponse watch
rejectWithResponseCode – Any request from such endpoints are rejected with the configured rejection response code for the effective period when type is set to rejectWtihResponseCodeeffectivePeriod – The duration, in seconds, for the specified action to occur. An effectivePeriod of "0" is treated as an infinite value.
(Refer to Enhanced DBL Profile - CLI for in-depth field descriptions) |
Command Example
> show table profiles services enhancedDblProfile
REJECT
AGGR RESET RESET WITH
RULE METHOD METHOD COUNT COUNT TIMER METHOD METHOD RESET RESPONSE EFFECTIVE
PROF NAME STATE NAME STATE SCOPE TRIGGER EVENT TYPE TYPE RESP TYPE VALUE WINDOW CONSECUTIVE TYPE RESP COUNT TYPE CODE PERIOD
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ENHDBL_TEST1 enabled RULE1 disabled ipAddress - - - aggrCount 10 60 enabled - - 1 rejectWithResponse 403 0
ENHDBL_TEST2 enabled RULE2 enabled ipAddress-Port-Transport authenticationTimeout REGISTER - aggrCount 10 60 enabled - - 1 watch - 60