You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

 

Use this command to allow the

Unable to show "metadata-from": No such page "_space_variables"
 to pick the SIP Header for anonymous call handling.

Note

This command does not apply to the 'show status' command. 


Command Syntax

% set addressContext <addressContext name> zone <zone name> sipHeaderForAnonymousCall <none | remotePartyId>

Command Parameters

SIP Header For Anonymous Call Parameter

Parameter

Length/Range

Description

sipHeaderForAnonymousCall

N/A

Set this parameter to remotePartyId to allow the

Unable to show "metadata-from": No such page "_space_variables"
to pick the SIP Header for calls from surrogate registered endpoints when the username in the FROM header is received as anonymous.

  • none (default) – The
    Unable to show "metadata-from": No such page "_space_variables"
    uses default anonymous call handling behavior whereby the call is allowed if the requireRegistration flag is set to supported/supported-group.
  • remotePartyId – The
    Unable to show "metadata-from": No such page "_space_variables"
    picks the SIP Header when a username in the FROM header is received as anonymous.

 

  • No labels