You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Use this parameter to specify route message validation on the 

Unable to show "metadata-from": No such page "_space_variables"
.

Command Syntax
 

% set addressContext <name> zone <name> sipTrunkGroup <name> signaling routeMsgValidation < noValidation | sipI | sipOnly>

Command Parameters

Route Message Validation Parameter

ParameterDescription
routeMsgValidation

Specifies if route validation should be done for the received message and if the message should be validated to ensure it is SIP-only or SIP-I. The call is released after invalidation if an invalid message type is received.

  • noValidation (default)

  • sipI – Route validation on received messages for SIP-I.

  • sipOnly – Route validation on received messages for SIP-only messages.

  • No labels