Controls network data in IAM.
To View and Edit Partition Id Net Id In Network Id IAM
On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Partition Id Net Id In Network Id IAM.
Select the desired Signaling Profile from the drop-down list to view its respective Partition Id Net Id In Network Id IAM parameters.
The Partition Id Net Id In Network Id IAM window is displayed.
Signaling Profiles - Signaling Profile - Egrees - Partition Id Net Id In Network Id IAM
The following fields are displayed:
Signaling Profile - Egress - Partition Id Net Id In Network Id IAM parameters
| Parameter | Description |
|---|---|
Generate Partition Id Net Id In Network Id IAM | When selected, the Partition ID and Network ID specified on the ingress Trunk Group screen is used to populate the Network Data parameter in the IAM sent over the egress trunk group. |
Propagate Partition Id Net Id In Network Id IAM | When selected, the Partition ID and Network ID received in the ingress IAM by the SBC are used to populate the Network Data parameter in the IAM sent over the egress trunk group. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools