Prefix Profile - Entry

In this section:

Use this object to configure the Prefix Profile.

To View Entry

On SBC main screen, go to Configuration > Profile Management > Category: Digit Parameter Handling Profiles > Prefix Profile > Entry.

Select the desired Prefix Profile from the drop-down list to view its respective Entry parameters.

The Entry window is displayed.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry

To Edit Entry

To edit any of the Entry in the list, click the radio button next to the specific Entry name.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Highlighted

The Edit Selected Entry window is displayed below.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Edit Window

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Entry

To create a new Entry, click New Entry tab on the Entry List panel.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Fields

The Create New Entry window is displayed.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Create Window

The following fields are displayed:

Prefix Profile - Entry Parameters

Parameter	Description
`Matching Pattern`	The pattern to match against a dialed number from the start position.
`Match Start Location`	The location in the dialed number to start a given prefix match. For the majority of matches, it will be the first dialed digit, which is start location 0.
`Total Min Digits`	The number of digits expected in the dialed number.
`Total Max Digits`	The maximum number of digits expected in the dialed number.
`Call Type`	Specify the Call Type for which this service exception applies: `Private` `National Operator` `Local Operator` `National Type` `International Type` `International Operator` `Long Distance Operator` `IP VPN Service` `Test` `Transit` `Other Carrier Chosen` `Carrier Cut Through` `User Name` `Mobile`
`Digit Type`	If Called or Calling Digit Type is selected as the escape type, select the digit type from the list. Values are: `Subscriber Type` `National Type` `International Type` `Subscriber Operator` `National Operator` `International Operator` `Vertical Service Code` `Easily Identifiable Number` `Toll free` `900 Premium Toll` `950 Carrier Access` `Local Operator` `Long Distance Operator` `Emergency` `Directory Assistance` `Service Access Code` `IP VPN` `Test` `Transit` `Other Carrier` Chosen `Carrier Access` `No digits` `Private` `Government emergency` `User Name` `IEPS`
`DM PM Rule`	Rules for standard digit manipulation (DM), Dialed Number Identification Service (DNIS) digit manipulation, and parameter manipulation (PM). `PAI_AND_FROM_HEADER` `PAI_DISPLAY_NAMES_1_NTL` `PAI_SIP_DSPNAME_CLG_NAM` `PAI_TEL_DSPNAME_GN_CPN` `PRFX_TO_HEADER_CDPN_NTL` `PRFX_TO_HEADER_GDPN_NTL` `PRFX_TO_HEADER_OCN_NTL` `SIP_ADD_PLUS SIP_REMOVE_CLG81` `SIP_REMOVE_PLUS1` `SIP_REMOVE_PLUS39 SIP_REMOVE_PLUS44` `SIP_REMOVE_PLUS49 SIP_REMOVE_PLUS52` `SIP_REMOVE_PLUS81 SIP_REMOVE_PLUS86` `SIP_REMOVE_PLUS91`
`Nature of` `Address`	From the drop-down list, select the nature of address for the traffic controls. The nature of address of the number (specified by the national ID and country code) to which to apply the specified traffic flow control profile. The options are: `950 (default)` `aniNotAvailableOrNotProvided` `aniOfCalledPartyNationalNumber` `aniOfCalledPartyNoNumberPresent` `aniOfCalledPartySubscriberNumber` `aniOfCallingPartyNationalNumber` `aniOfCallingPartySubscriberNumber` `anyapnNumberingPlan` `ignore` `international` `internationalNotRestricted` `internationalOperator` `internationalRestricted` `national` `nationalNotRestricted` `nationalOperator` `nationalRestricted` `networkSpecific` `noNumberCutThrough` `noNumberOperatorRequested` `none` `partialCallingLineId` `passThrough` `spare00...spare26`
`Numbering Plan` `Indicator`	The numbering plan indicator (NPI) to be assigned to a number when a match succeeds. `<None>` `ISDN` `Data` `Telex` `Private` `Offset Unused` `Spare 0/Unknown` `Spare (1 through 7)` `Telephony` `Ignore`
`Number Leading` `Prefix Digits`	The number of leading digits to be considered part of the prefix. The options are: `data \| ignore \| isdn \| none \| offsetUnused \| private \| spare0Unknown \| spare1 \| spare2 \| spare3 \| spare4 \| spare5 \| spare6 \| spare7 \| telephony \| telex`
`Number Leading Prefix Digits to Strip`	The number of leading digits to be stripped.
`Apply Dm Rule`	Enable to apply Dm/Pm Rule. `disable` (default) `enable`
`Determine Area`	When this flag is enabled, the area code is determined from the analyzed digits. `disable` (default) `enable`

To Copy Entry

To copy any of the created Entry and to make any minor changes, click the radio button next to the specific Entry to highlight the row.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Highlighted

Click Copy Entry tab on the Entry List panel.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Fields

The Copy Selected Entry window is displayed along with the field details which can be edited.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Copy Window

Make the required changes to the required fields and click Save to save the changes. The copied Entry is displayed at the bottom of the original Entry in the Entry List panel.

To Delete Entry

To delete any of the created Entry, click the radio button next to the specific Entry which you want to delete.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Profile Management - Digit Parameter Handling Profiles - Prefix Profile - Entry Delete Confirmation

Click Yes to remove the specific Entry from the list.

Space shortcuts

Page tree

To View Entry

To Edit Entry

To Create Entry

To Copy Entry

To Delete Entry