You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Network wide licensing uses licenses supplied by a centralized licensing server running within the EMS.

Note
  • SWE-INSTANCE and SBC-RTU licenses are mandatory when configuring S-SBC instances for call admission.
  • The SWE-INSTANCE license is the only license that is required for launching an M-SBC instance.  Do not specify any other software licenses in the required license table when configuring the M-SBC instance. For more information on configuring SBC instances, see Creating an SBC SWe Cluster.

To configure D-SBC SWe for network wide licensing:

  1. Log on to EMS SWe.
  2. In Element Management, click SBC Manager. The SBC Manager window displays.
  3. Select SBC 5X00 from the Device Types drop-down.

  4. Select the D-SBC instance from the list appearing in the left pane. The SBC Configuration Manager page displays.

    D-SBC Configuration Manager

  5. Click Administration > System Administration.

  6. Select License Management > License Mode. The License Mode page displays.

  7. Select Network from the Mode drop-down.

  8. Select a protocol version.

  9. Click Save.

    License Mode


    The Updated Successfully message displays.

  10. On the navigation pane, click License Management > Network License Settings > License Server. The License Server page displays.
  11. Click + New License Server.  The Create New License Server section displays.
  12. Enter Server Name.
  13. Enter Priority.
  14. Set State as Enabled.
  15. Enter Server Address.

  16. Click Save. 

    Creating a License Server


    The Object created successfully message displays.

     

    If using redundant EMS (EMS GR), create a license server for each EMS instance, with priority 1 for the source EMS and priority 2 for the target EMS.

  17. On the navigation pane, click License Management > Network License Settings > Required License. The RequiredLicense page displays.
  18. In the Required License List section, click + New Required License.  The Create New Required License section displays.

  19. Select the required license from the Feature Name drop-down.

    Based on the license selection, you are prompted to enter the Min Count and Max Count.

  20. Click Save.

    Creating New Required License


    The Required License created successfully message displays.

  21. Select Administration > System Administration > Platform Management and click Restart SBC Application.

  22. After application restarts, click License Info List section to view the configured license information.

    S-SBC License Information


    For more information, refer to Network Licensing.
    For more information on Alarms, refer to SBC Network Wide Licensing Alarm.

 

  • No labels